Just an FYI!
Thread Starter
FormerVendor
Joined: Oct 2006
Posts: 3,123
Likes: 3
From: D-F/W
Just an FYI! Hey guys... and gals,
If you did not know already ACE Racing Transmissions is not your average run of the mill Tranny Shop. We do all sorts of installs and can build your M6 if needed. We do clutch installs converter swaps and so on.
Some examples of pricing would be.... converter swaps as low as $275.00, clutches from $300.00 for the labor and rear gear swaps for $325.00 plus parts!
If you have any questions about what we can or cannot handle just pick up the phone and call, send me a p.m. or shoot me an e-mail!
We will price match anybodys written estimate also!!!!
g
If you did not know already ACE Racing Transmissions is not your average run of the mill Tranny Shop. We do all sorts of installs and can build your M6 if needed. We do clutch installs converter swaps and so on.
Some examples of pricing would be.... converter swaps as low as $275.00, clutches from $300.00 for the labor and rear gear swaps for $325.00 plus parts!
If you have any questions about what we can or cannot handle just pick up the phone and call, send me a p.m. or shoot me an e-mail!
We will price match anybodys written estimate also!!!!
g
Last edited by Gilbert@Ace Racing; Oct 22, 2007 at 03:14 PM.
Thread Starter
FormerVendor
Joined: Oct 2006
Posts: 3,123
Likes: 3
From: D-F/W
Well it occured to me that we have never let you guys know what we did here and so I thought I would put a few words up about us. All you gotta do is give me a call and we can handle it! Practically anything! If we cannot handle it, chances are we know who can!
I am ASE Master Certified. I have held that card for over 10 years now. I have over 20 yeas of new car dealership experience, over 10 of those years I did Driveability / Fuel Injection repairs, I was asked to sit on an Technician Advisory Board for Chrysler Corporation shortly after OBDII came out in 1996 for a month, I have built engines on line, built transmissions on line and have served as Shop Foreman in a busy major metropolitan dealership.
John Orlando is our builder. He has been building transmissions for over 25 years, more than 10 years building high performance units, there is not a transmission that he does not know well, not a transmission he cannot build period.
Mike Varela is our technician, He has over 9 years in the industry and is invaluable to the company as our R&R, clutch man, etc...
If you have any question about anything on any car.... just ask away!
g
I am ASE Master Certified. I have held that card for over 10 years now. I have over 20 yeas of new car dealership experience, over 10 of those years I did Driveability / Fuel Injection repairs, I was asked to sit on an Technician Advisory Board for Chrysler Corporation shortly after OBDII came out in 1996 for a month, I have built engines on line, built transmissions on line and have served as Shop Foreman in a busy major metropolitan dealership.
John Orlando is our builder. He has been building transmissions for over 25 years, more than 10 years building high performance units, there is not a transmission that he does not know well, not a transmission he cannot build period.
Mike Varela is our technician, He has over 9 years in the industry and is invaluable to the company as our R&R, clutch man, etc...
If you have any question about anything on any car.... just ask away!
g
Thread Starter
FormerVendor
Joined: Oct 2006
Posts: 3,123
Likes: 3
From: D-F/W
We'll be here for ya! When you get ready lemme know and we'll get you fixed up.
If you are going to buy the gears and bring them in that's not a problem... but be sure to get a install kit as well. That will save some time and energy! If you would like for us to get them for you just give us a shout.. either way works for me.
g
If you are going to buy the gears and bring them in that's not a problem... but be sure to get a install kit as well. That will save some time and energy! If you would like for us to get them for you just give us a shout.. either way works for me.
g
