Just picked this up.
measured them, stock axles are 32" and these are 27.5", not sure how long the axles are for the 9" ford for the fbody but i think they are longer than 27.5". well one is that size the other is either shorter or longer.
Last edited by Mike96z; Nov 25, 2007 at 02:18 PM.
if you order a 9" they dont come short, come standard size, mine are short, and I can show you where i got them. SO DAMN HARD to find 3" spacers around here lol. Pm me
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
can you get those spaceers with bigger studs? on the axle and wheel?
also whats the risk in these over running a typical 1/4 or 5/16 "spacer" are these more likely to break
Last edited by daniel6718; Nov 27, 2007 at 12:03 AM.
It will work fine. They are alot stronger than regular (typical) 1/4 or 5/16 spacers because they are a higher quality and stronger and solid. I wouldnt recommend stacking them but I found these 3" spacers, cant find any bigger but I found anything else you could want under it. I am using the long studs for the spacer and will prob double up on the lugs on each one. Then will replace the ones that come in it as pictured with long ones also. You can take out the ones they come with and put in your own and will work with long ones fine. Ive used these type of spacers before and they are all over ebay. But the 3" I couldnt find but I got a guy who actually has them and could send anyone the link that needs it. The studs im using on my axles:
