FT - BBC (468ci)
12-20-2007, 07:59 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (22)
Join Date: May 2007
Location: DFW, Tx
Posts: 739
Likes: 0
Received 0 Likes
on
0 Posts
FT - BBC (468ci) Ready to go full fledged late model...need to part with my long standing project....just cant get motivated for it
Looking to trade for an LS motor with mods
12bolt or 9in rear - complete + cash
__________________________________________________ ___
468ci 10.5/1 comp motor - External balance - ALL NEW!!
Cast crank stock stroke
Cast block bored .60 over fully machined
Oval port heads all new parts - 781 castings
hypereutectic dome top pistons
H-beam eagle rods
Hydro cam .560 lift/.290 duration
SFI dampener and flexplate
Gear drive
Strip Dominator intake - powder coated
Fabricated aluminum valve covers
1.7 stainless steel roller rockers
COMP 3/8 hardened push rods
HEI distributor with 8mm Taylor wires
7qt chrome oil pan
Long style water pump with pulley attached and crank pulley
Have a set of headers that will fit a mid 80s style truck for the motor
Have other parts that can go with it. My machinist can confirm all work done to this motor.
4kobo
Pic: http://dallas.craigslist.org/pts/515642827.html
Looking to trade for an LS motor with mods
12bolt or 9in rear - complete + cash
__________________________________________________ ___
468ci 10.5/1 comp motor - External balance - ALL NEW!!
Cast crank stock stroke
Cast block bored .60 over fully machined
Oval port heads all new parts - 781 castings
2.19/1.88 stainless steel valves
double springs heads completely worked by Max Long at LRE
springs good to a 590 lift
ARP head bolts double springs heads completely worked by Max Long at LRE
springs good to a 590 lift
hypereutectic dome top pistons
H-beam eagle rods
Hydro cam .560 lift/.290 duration
SFI dampener and flexplate
Gear drive
Strip Dominator intake - powder coated
Fabricated aluminum valve covers
1.7 stainless steel roller rockers
COMP 3/8 hardened push rods
HEI distributor with 8mm Taylor wires
7qt chrome oil pan
Long style water pump with pulley attached and crank pulley
Have a set of headers that will fit a mid 80s style truck for the motor
Have other parts that can go with it. My machinist can confirm all work done to this motor.
4kobo
Pic: http://dallas.craigslist.org/pts/515642827.html
Last edited by Stroked96Bowtie; 12-20-2007 at 11:06 PM.
