Got Drug.........
05-22-2008 | 05:36 PM
#1
Thread Starter
TECH Fanatic
Joined: Jan 2005
Posts: 1,196
Likes: 0
From: Pearland, TX
Got Drug......... Sooooo, my good friend Chase just put his S-trim on his coupe and got it tuned. It made good power for a H/C 302 making 6lbs. More than the wifes H/C camaro. I knew he was gonna get me I just wanted to see how bad.......he makes a little more power and his car wieghs in UNDER 3000lbs. Dont get me wrong Jess's car is no slouch tho, it rolled a blown coupe the other night on our way to the bar haha. It was 2 big messican guys thinkin they were hot ****.
Anyways we went cruisin around to see if we could find any meets. After cruising for a bit we ended up in Mexico and decided to get down to business. First run I was in 3rd (big mistake) and it was too low in the power band and by the time he was done rowing his gears I wasnt even in 4th...... and it wasnt pretty either. Our second run we pretty much ran a train on some random 4.6 GT and I got to play catch up. 3rd time I started in 2nd (
) at like 5 grand. We both hit it and he instantly puts half a car on me (Damn Blower Cars) nearing the top of 2nd I slow his pull down drastically and almost get my half car back when he shifts to 4th. Then I hit 3rd giving him back his half car and then he starts pulling away again. He gets little more than a full car on me before he shuts it down........good thing because the slave on Jess's car only lets me shift 1 time @ WOT before it stays on the floor (it still shifts but it just takes what seems like an eternity).
All in all his car moves so If you see a red coupe with the squeaking belt mod on the South Side your gonna need a little more than H/C to get around that fox. _Zac I think hes coming for you next. lol.
I know I know I shoulda filmed it but I will next time.
Anyways we went cruisin around to see if we could find any meets. After cruising for a bit we ended up in Mexico and decided to get down to business. First run I was in 3rd (big mistake) and it was too low in the power band and by the time he was done rowing his gears I wasnt even in 4th...... and it wasnt pretty either. Our second run we pretty much ran a train on some random 4.6 GT and I got to play catch up. 3rd time I started in 2nd (
) at like 5 grand. We both hit it and he instantly puts half a car on me (Damn Blower Cars) nearing the top of 2nd I slow his pull down drastically and almost get my half car back when he shifts to 4th. Then I hit 3rd giving him back his half car and then he starts pulling away again. He gets little more than a full car on me before he shuts it down........good thing because the slave on Jess's car only lets me shift 1 time @ WOT before it stays on the floor (it still shifts but it just takes what seems like an eternity). All in all his car moves so If you see a red coupe with the squeaking belt mod on the South Side your gonna need a little more than H/C to get around that fox. _Zac I think hes coming for you next. lol.
I know I know I shoulda filmed it but I will next time.
05-22-2008 | 07:56 PM
#5
Thread Starter
TECH Fanatic
Joined: Jan 2005
Posts: 1,196
Likes: 0
From: Pearland, TX
Cmon zac the reason I even want to see yall run is because both of you guys had about the same pull on me. Stock bottom end, full interior, powersteering and A/C........sounds like a street car to me.....just like your car. 
05-22-2008 | 08:01 PM
#7
Thread Starter
TECH Fanatic
Joined: Jan 2005
Posts: 1,196
Likes: 0
From: Pearland, TX
Ive asked him if he wanted to come get dynoed at yalls place because fast lanes torque sensor was broken and he wanted to see that reading........I swear ive never seen so many GT500's in my life........and they were ALL modded to hell. ******* GT500's with 2.8 KB blowers with ******* direct ports just chillin.....like it aint no thing. I dont get it
Trending Topics
05-23-2008 | 09:27 AM
#12
yah thats an insane amount of power for 6psi on a 302 fox. Is that stock bottom end? My buddy made a littl over 440 but he was pushing about 10psi on a stock bottom end fox....what kinda dyno did they do this on?
05-23-2008 | 04:18 PM
#14
Thread Starter
TECH Fanatic
Joined: Jan 2005
Posts: 1,196
Likes: 0
From: Pearland, TX
Im not sure what kinda dyno fast lane has.......I told him he should let gforce dyno it just to see the power and torque on theirs.
05-23-2008 | 04:52 PM
#15
On The Tree
Joined: Dec 2003
Posts: 199
Likes: 0
From: Friendswood, Tx
Chases car rolls man, it made 305 N/A. Bottom end is stock, he has bad *** heads, cam and intake. Most N/A stock bottom end fox bodys dont make 300+ to the wheels. Mine made like 285 N/A and it was a 306.
Im not sure what kinda dyno fast lane has.......I told him he should let gforce dyno it just to see the power and torque on theirs.
Im not sure what kinda dyno fast lane has.......I told him he should let gforce dyno it just to see the power and torque on theirs.
You should have let Jess drive..lol
05-23-2008 | 06:00 PM
#16
Thread Starter
TECH Fanatic
Joined: Jan 2005
Posts: 1,196
Likes: 0
From: Pearland, TX
Then nobody would race her........shes almost causes accidents just driving it.....I mean come on what would you do if you saw her in her SS with the cut out open.......I know id crash in to something lol!!
