isky fly cut tool, which one?
Re: isky fly cut tool, which one? If you are going with stock valves, the 2.060 cutter will work.
If using a 2.02 valve, get the 2.100 cutter.
We have used the 2.060, and the 2.100 cutters, and the latter works best
Louis
If using a 2.02 valve, get the 2.100 cutter.
We have used the 2.060, and the 2.100 cutters, and the latter works best
Louis
Thread Starter
TECH Apprentice
iTrader: (4)
Joined: Nov 2001
Posts: 304
Likes: 0
From: lebanon, ohio
Re: isky fly cut tool, which one? sweet, thanks a lot!! another question, will it hurt to use the 2.100 for now with stock valves, i plan to upgrade later on...
Restricted User
Joined: Jun 2003
Posts: 588
Likes: 0
Never mind guys I found the tools I needed and I'll post the link in case any of yall need soomthing like this. The guy was really helpful and didn't mind answering all my questions.
http://www.etsupply.com/edgetools/index.html
Look under the In Head Piston Cutters
http://www.etsupply.com/edgetools/index.html
Look under the In Head Piston Cutters
Isky has the cutters separate from the stem adapter, so it might be a little confusing. For those of you wanting to flycut on an LSx motor, we rent a dummy head with the cutter for about the same price as just the cutter alone. We charge X amount, and refund 75% of it back when we receive the tools back
