Post pics of your tool boxes/tool collections
Tools and boxes are expensive, but if you look around you can get used snapon, matco, etc. for a little more than craftsman. The quality comparison between snapon and the others is 1000 times better than craftsman, kobalt, huskey and all of those.
I dont have a picture of just my toolbox, but you can see it in this picture.
I dont have a picture of just my toolbox, but you can see it in this picture.
u know ur making it very hard to look past the cars to the tool box right....
for great cars and tool boxes....lol all i have is a picture of my box but its a Cornwell Tools Troy Lee Designs Special Edition #28 out of a 150 made. absolutely no idea on price of tools inside but im guessing around 20k+ not even including my Snap On Solus Pro. im only 22 right now i cant even imagine what im going to have by 30!
THIS IS WHAT IT LOOKED LIKE WHEN I FIST MOVED INTO THE HOUSE...
My GF/ now wife got me that roll cart and the box for x-mas...
now 4 years later... I have a ton more tools and a much bigger box...
ill get some more pics this weekend... I was going to clean the Garrage tomorrow anyway...
My GF/ now wife got me that roll cart and the box for x-mas...
now 4 years later... I have a ton more tools and a much bigger box...
ill get some more pics this weekend... I was going to clean the Garrage tomorrow anyway...
HERE IS SOME MORE PICS... I JUST CLEANED UP A LITTLE AND SNAPPED A FEW PICS... I HAVE COME TO THE REALAZATION I NEED A BIGGER SHOP... ALTHOUGH IT'S 2.5 CARS WIDE AND 1.5 CARS DEEP I STILL NEED MORE ROOM, AND THE CELING IS TOO LOW FOR A LIFT... WITCH SUCKS CAUSE I CAN'T GET MY BIG LIFTED TRUCKS IN HERE...
THE SNAP ON BOX IS FOR ALL MY AUTO TOOLS, THE MATCO "RATFINK" BOX IS FOR ALL MY RC CAR ****... AND THE CRAPSMAN IS FOR MISC NUTS BOLTS AND MANUELS/ PAPERWORK ON TOOLS AND SUCH...
THE SNAP ON BOX IS FOR ALL MY AUTO TOOLS, THE MATCO "RATFINK" BOX IS FOR ALL MY RC CAR ****... AND THE CRAPSMAN IS FOR MISC NUTS BOLTS AND MANUELS/ PAPERWORK ON TOOLS AND SUCH...
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Here's my lil thang. 7 feet tall, almost 10 feet long. Tunes in the side cabinet. 
I could show you what's in it, but I'd have to systematically hunt each and every one of you down ,and keel you!!
BTW, this box is 10 years old this year.
I could show you what's in it, but I'd have to systematically hunt each and every one of you down ,and keel you!!
BTW, this box is 10 years old this year.
Banned
Joined: Apr 2007
Posts: 269
Likes: 0
Tools and boxes are expensive, but if you look around you can get used snapon, matco, etc. for a little more than craftsman. The quality comparison between snapon and the others is 1000 times better than craftsman, kobalt, huskey and all of those.
I dont have a picture of just my toolbox, but you can see it in this picture.
I dont have a picture of just my toolbox, but you can see it in this picture.
There are some seriously nice boxes/tools in this thread, I guess my little husky will have to do for a while...haha
TECH Fanatic
Joined: Jul 2007
Posts: 1,516
Likes: 0
I cant post a link to our website being that we arn't a sponsor on here. The name of the shop is RPM located in Pittsburgh, PA.
That's gorgeous. Looks like you guys do fantastic work. You should sign up to sponsor so we can droll over your projects!!
I like makin **** go fast. I don't have the patience to make em that pretty.
I like makin **** go fast. I don't have the patience to make em that pretty.
TECH Fanatic
Joined: Jul 2007
Posts: 1,516
Likes: 0
the **** we build looks badass while haulin ***. Most of our cars are BBC equiped, just this one is a little different. I guess I cant even say BBC, almost all of them are 502 ramjet or 572 crate engines.
I dont know if I can do this but if you google rpm pgh you might find us in there. We have a parent company called prorides. If you are a regular recipient of summit racing you have seen the bright green starliner that was completed at our shop. We also built a blue 41 ****** that was on summits homepage for a long time.
I dont know if I can do this but if you google rpm pgh you might find us in there. We have a parent company called prorides. If you are a regular recipient of summit racing you have seen the bright green starliner that was completed at our shop. We also built a blue 41 ****** that was on summits homepage for a long time.
9 Second Club
Joined: Oct 2006
Posts: 1,192
Likes: 243
From: IL
The girlfriend got me the box for Christmas, which is the first "real" box I ever had. Before this one I only had the molded plastic box from the kit I had, aka I had no room for expansion. Now that I have a decent box I am in need of tools (especially screwdrivers which have all seemed to disappear). Anyway on with the pics!!
Sean
Sean
SnapOn has a nice set of screwdrivers that are pricey of course, but for a more reasonably priced alternative, check out the Craftsman professional line, they have a 6 or 7 piece set that's very nice. I have their set as well as a few SnapOn sets, and the Craftsman set gets the job done just fine.