first time forum user..need a little help
Thread Starter
Registered User
Joined: Dec 2011
Posts: 3
Likes: 0
From: LA
first time forum user..need a little help hey guys name is james i have a 99 Z28 with a couple mods. this is all new to me so if you guys can kinda explain how to search for posts, and put threads in there appropriate spot as well as the lingo like stickies and PM and what ever else i might need to know i would really appreciate it thanks guys...and also i did the drill mod on my camaro and i did mostly very thing the site said.
http://www.installuniversity.com/ins...r_cylinder.htm
the only thing i didn't do is pull the hole master cylinder off (thats a Pain) but i drilled the line cleaned it really good then installed it i spent 6 hours bleeding it and the next day about 4 hours with a mityvac it pulled so much air bubbles out even took it to my buddys shop after and spent another 30 min bleeding it the old fashion way and i still have a lazy clutch peddle,
i have been doing a lot of research and from what I've been reading its a pain to bleed but i dought it takes as long as it has for me if you guys can give me an ideas on how to go about fixing this it would help out
http://www.installuniversity.com/ins...r_cylinder.htm
the only thing i didn't do is pull the hole master cylinder off (thats a Pain) but i drilled the line cleaned it really good then installed it i spent 6 hours bleeding it and the next day about 4 hours with a mityvac it pulled so much air bubbles out even took it to my buddys shop after and spent another 30 min bleeding it the old fashion way and i still have a lazy clutch peddle,
i have been doing a lot of research and from what I've been reading its a pain to bleed but i dought it takes as long as it has for me if you guys can give me an ideas on how to go about fixing this it would help out 
