looking for two cars-

1. Looking for a high milage, salvage title, or ls1 in need of work (blown rear/tranny/ect) camaro or trans am. Black, red or white prefered but will look at anything. This will be turned into a drag/track car so i'm just looking for a solid foundation to start building on.

2. Looking for a '96 and up mustang that is in need of any drivetrain parts (motor, tranny, rear ect) preferably hardtop 5 speed car, must be a v8. Yet again just looking for a project thats cheap to get into.

I dont care if its yours, your friends or just a deal you've run across. Either way let me know if you know of anything that fits the criteria of either.

I am located in Maryland, but for the right deal i will travel.

 

i have a t/a with a 9'' rear i want 9k for

 

need something cheaper so i can cut it up.. bump

 

thats ok, car sold this evening anyway.....free bump for another fellow teching in

 

98 nbm z28 m6 roller,95 svt cobra m5 5.0l roller.if this is what you're looking for let me know.

thanks
christian
937 654 0924

 

i have a 1998 trans am aound 86,000 miles rebuilt title. new 383 ls6 2.5 ported heads ms4 cam edelbrock pro flo intake lower control arms ,slp long tubes, slp loud mouth 1, auto tran, the cowl is cut out for intake no wipers. i got about $6000 in the motor. the body needs finished about ready to paint. needs a stall too. if interested i can get pics would like $6500

 

https://ls1tech.com/forums/vehicles-...ew-jersey.html




took this car in on a trade a few months back...awesome car!

 

Not sure if you are still looking for your project red Camaro. Here is one on the other coast :-) for $4500 OBO:
https://ls1tech.com/forums/vehicles-...sfield-ca.html

Regards!

 

I have 99 z28 with 70k on clock

salvage title ls1 runs and drives

needs fenders, hood ,

vette wheels with nice toyo tires

asking 3500

 

I have a 96 firebird, LS1, heads cam, 90/90, no transmission. no torque arm, no seats, 6pt cage, sfc, 4k

 

Its not a 96 up but its best of both worlds and its a project.

Ok bumping it up for sale $3000 takes her will entertain trades. The LS1swap AJE setup is on back order for 6+ months from what I am told.

Original Auto car has power locks and manual windows. I have better seats for it with rear they just need a good cleaning.

Truck 5.3 miles NA has new head gasket.
Edelbrock intake will need a carb
MSD 6010 box to power carbed setup
A1000 fuel pump with filter
TH400 had TCI 4k stall tight for nitrous and flywheel.
will also come with cam and crank sensor. LS1 front setup with aftermarket billet tensioner, and starter.
You will need fuel regulator injected/carb style, shifter, drive shaft, carb, move tranny x-member back and wire her up to make her drive.
AJE K-member with motor mounts for LS1,tubular A-arms, BMR coil-over kit.
built 8.8 w/ spool 3.73 gears 33spline superior Axles
drag bag in right rear with drag springs.
you can reach me at 361-877-4518 or blloyd6920@yahoo.com

click pic for slide show