looking for 00-02 trans am modified
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
hey guys looking for a 00-02 trans am ws6 or trans am thats modified need something that is a little more than stock also looking for an automatic if you have anything let me know thanks
#2
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Its 2001 NBM Trans Am Fully Built. It does has some flaws on the body as in scratches but there not bad and there is a spot on the driver door where the paint came off due to a pressure washer, dash is cracked like most of these cars and driver seat has a small rip. I love this car but its time to let go...
List of everything on the car...
408cui. bout 540HP,
PRC 220cc 5.3 stg. 2.5 heads, TSP Torquer V2 Cam Spec: 232/234 .595/.598 on 112 LSA, LS7 Lifter, Chromoly Pushrods, TSP Ported LS6 Oil Pump, 92mm Fast Inake w/ 92mm PTC TB, 98mm FTP Air Lid, 85mm MAF. Pacetter Longtube Headers, Pacetter Off Road Y pipe, Borola Adjustable Catback Exhaust. Built 4L60E Trans, Yank SS 4000 Stall. BMR Lowering Spring with front adjustable KYB struts, Sphon Rear Lower Control Arms WIth Adjustable Brackets, Adjustable Rear Pan Hard Rod. Moser 12 Bolt Rear End, 33 Spline Eaton Locker With Aluminum Cover, 3.73 Gears. C5 9.5'' Fronts With Fierce 275/40/17, Hoosier Drag Radials 10.5'' Rears 315/30/18.
Motor and Trans only have a few thousands miles since build.
List of everything on the car...
408cui. bout 540HP,
PRC 220cc 5.3 stg. 2.5 heads, TSP Torquer V2 Cam Spec: 232/234 .595/.598 on 112 LSA, LS7 Lifter, Chromoly Pushrods, TSP Ported LS6 Oil Pump, 92mm Fast Inake w/ 92mm PTC TB, 98mm FTP Air Lid, 85mm MAF. Pacetter Longtube Headers, Pacetter Off Road Y pipe, Borola Adjustable Catback Exhaust. Built 4L60E Trans, Yank SS 4000 Stall. BMR Lowering Spring with front adjustable KYB struts, Sphon Rear Lower Control Arms WIth Adjustable Brackets, Adjustable Rear Pan Hard Rod. Moser 12 Bolt Rear End, 33 Spline Eaton Locker With Aluminum Cover, 3.73 Gears. C5 9.5'' Fronts With Fierce 275/40/17, Hoosier Drag Radials 10.5'' Rears 315/30/18.
Motor and Trans only have a few thousands miles since build.
#3
TECH Enthusiast
iTrader: (15)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I've got a 99 a4 nbm TA with vfn ws6 hood, thunder racing cheatr cam, gmmg cat back, frost tune, lid, 101k some suspension upgrades, great shape. Pm me for more parts info if interested. Also choice of zoop sealed 17x9.5 torq thrust 2's with fairly new nitto 555's or 06 corvette split spokes in chrome with bald tires. They're 18" and 19". $8500
Also have an stock ws6 02 nbm m6 with 47k, borla catback and HID low beams, near mint for approx 15k. I'm located near Memphis tn.
Also have an stock ws6 02 nbm m6 with 47k, borla catback and HID low beams, near mint for approx 15k. I'm located near Memphis tn.
#6
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
No it was for the other person.
http://cars-on-line.com/40276.html
Not interested in this car it is so nice and clean, it now has the OEM ram air hood that makes it look so much better. I think you will love this car. All upgrades were done professionally so no worries at all, the car now has only 59k miles on it and runs great.
http://cars-on-line.com/40276.html
Not interested in this car it is so nice and clean, it now has the OEM ram air hood that makes it look so much better. I think you will love this car. All upgrades were done professionally so no worries at all, the car now has only 59k miles on it and runs great.
#7