hlaalu

iTrader: (3)

i need to move my SS emblems in the back, how are they on there, and how do i stick them back on?

94'BLKBRD

iTrader: (76)

Stick them back on with some 3m Emblem Adhesive.....Autozone carries it

hlaalu

iTrader: (3)

cool ty, ill pick some up when i go back for more oil.


can someone give me the measurements on where they need to be on the back berger?

nz12's

iTrader: (4)

As far as getting them off, use a hair dryer for about 1-2 min on high and they will peel right off. Use wd40 to get the residue off after you roll the big stuff off with your fingers!

djsanchez2

iTrader: (14)

https://ls1tech.com/forums/7859671-post7.html

hlaalu

iTrader: (3)

thx for the tip!

nnnnnno!

hlaalu

iTrader: (3)

can someone give me different measurements for the rear SS badges? the one in the link use the chevy symbol as a guide, i don't have one

ROCNDAV

iTrader: (100)

I used a heat gun when taking one off of my front fender and I messed it up. I tried to take it off with a putty knife. I heard that you can take them off with fishing line & heat.

The place that painted my fender took them off and put them on a piece of cardboard. they look great (reusable). I'm going to use that one on the SS grille.


I bought new emblems for the Fenders. I still havent put them on yet, like you I've been wondering about putting them on in the right spot.

hlaalu

iTrader: (3)

the fender measurements from that link are really good. and if someone can tell me how long the chevy symbol emblem is i can figure out where the SS goes

camarojunky74

iTrader: (14)

the panel back their is not called a "berger" in fact many people get confused with that due to the fact that "berger chevrolet in grand rapids michigan did this in the 60's as a signature thing. then gmmg replicated it on the 4th gen berger cars. the panel back thier is called nothing that i can think of.

and ill go home and measure for you if no one comes in here to help you

hlaalu

iTrader: (3)

perhaps, but YOU knew exactly what i was talking about when i called it that

camarojunky74

iTrader: (14)

well just about everyone knows what a berger panel is, and typically they are black lol.

just helping you out man

ss.slp.ls1

iTrader: (36)

Goo Gone also works well to remove the adhesive.

hlaalu

iTrader: (3)

i know im just giving you a hard time because it was YOUR eye that saw how these were out of place. But im glad you caught that, i want it to be perfect

i've got plenty of that!

ss.slp.ls1

iTrader: (36)

Nothing wrong with being meticulous.

hlaalu

iTrader: (3)

yes sir!

onephatZ28

iTrader: (8)

Where can I get some SS emblems?? Sorry for the

hlaalu

iTrader: (3)

here ya go, its the whole kit. they have the red trim, i think these would look great on your new car (if thats what they are for)

http://cgi.ebay.com/ebaymotors/97-02...Q5fAccessories

ss.slp.ls1

iTrader: (36)

Get yourself a bottle of goo gone and a putty knife. Drive around the LA area and find yourself a donk'd out SS and steal it's badges because it doesn't deserve them anymore.

ss.slp.ls1

iTrader: (36)

those are for a black car. I don't think that the red outline would look good on a SOM car. Get the ones with the silver outline.