new rebuilt tranny slipes??
i just bought a new (rebuilt) 4L60E transmission(automatic) for my 2001 camaro just got it tuned as racers edge tuning by greg amazing work, figured sence i went from a 3500 stall to a 2800 stall conver the tune was the problem, apparently not, from idle it seems to jump into gear slightly sometimes rough and at full throttle or if i "get on it" it misses 2nd and 3rd(D) itll hit 2nd but very sluggish( seems to hang in the higher rpms, and for the most part misses 3rd(D) completely a code shot out saying the Solenoid from 1 to 2nd was bad so could it be bad solenoids all around when i drive normal it shifts perfectly.
It was nice meeting you today, other then the trans slipping I am glad you are happy with the tuning that was done. If you need anymore assistance let me know. Personally I would ship those guys the trans and converter and have them go through it.
Heres your graph, MAF table and VE spot on.
Heres your graph, MAF table and VE spot on.
my stock trans was fried beyond belief so i had to get a rebuilt one from mad dog transmissions there out of GA and im in cali it only costed me like 1600ish with shipping a year warrenty and holds up to 500 hp, pretty decent besides the fact im having issues, told me my problem was my solenoids prob got dirty and are going out prob true sence my tranny cooler and lines werent cleaned out very well so the old burnt to **** tranny fluid was still in it but there sending me new ones free of charge, juss have to figure out how to put them in but this tranny has a stage 2 shift of 3 when it hits she hits hard knocks ya in your seat.
I will say if you ever decide that trans is not up to your liking Johnny at Xtreme Performance Trans is local to us Southern Cali people and he built my trans it is stupid solid and for about $1500 too.

