replace clutch but its really hard to put the gears in
#1
TECH Regular
Thread Starter
iTrader: (19)
Join Date: Apr 2007
Location: longbeach CA
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
replace clutch but its really hard to put the gears in
hey guys and gals i just replaced the clutch on my 99 transam with a monster stage 3 kit,new master,new slave,new bolts,did the drill mod and put the speed bleeder on it.but the gears are very hard to go in; i been bleeding it like crazy but it doesn't help what could be wrong, the car moves a little when its in first gear with the clutch all the way pressed in.when i drive it the gears are alittle hard to go in but they go in.
#3
Launching!
iTrader: (6)
Join Date: Aug 2007
Location: La Puente
Posts: 294
Likes: 0
Received 0 Likes
on
0 Posts
So does it seem like the clutch is not disengaging? Dont bleed it any more. I had that speed bleeder and Had nothing but problems with it. I took it off. Replaced my slave, And to bleed my system, I simply sat there and pumped my clucth for 5-10 minutes none stop. 3 years later its still working great and never opened the bleeder once.
Try pumping it just like that and see what happens. Maybe the clucth you installed requires a Shim behind the Slave which would help with the clutch disengaging. I know SPEC clutches require one.
Try pumping it just like that and see what happens. Maybe the clucth you installed requires a Shim behind the Slave which would help with the clutch disengaging. I know SPEC clutches require one.