01 ss m6 modded
01 ss m6 modded The car is a: (Never Wrecked)
2001 M6 Red Camaro SS
Brand New Lq9 with only 700 miles since rebuilt.
60,000 miles on the frame
Ebony interior
Done the wide open throttle tune on a mustang dyno and it Made 450/420 hp/tq wich is equal to about 470/440 on a dynojet.If i get a chance I will go back to a dynojet to verify these numbers.
Tsp Edelbrock Terminator Heads with dual springs
ARP Head Bolts
T-Rex cam
Hardend Pushrods
Fast 90mm Intake
Fast 90mm TB
42lbs SVO injectors
Professoinal Product Fuel Rails
ARP Rod Bolts
Bulldawg Double Roller Timing Chain
SLP underdrive pulley
SlP Lid
K&N filter
Cold air intake mod
Engine coolant bypass mod
Walbro 255 fuel pump
It is sd tuned, but I have a 80mm maf if you rather have that.
Supension
Pro 5.0 Shifter
Textrilla clutch
Spec Billet Flywheel + Arp Flywheel bolts
Both balanced together
4:10 Gear
Bmr adjustable tq arm
adjustable lca's
adjustable Panhard bar
Drilled slotted rotors
Painted red calipers with ss deacal
18" Boyd Blaster wheels. Highly polished
265/40/18 and 295/35/18
Exhaust
Hooker Coated 1 3/4 headers
Tsp y with a custom Flowmaster Merge collector
Slp loudmouth exhaust
Flow master Muffler
Two Cutouts
Interiour
Aem WIdeband
Corvette Dash overlays
Trans Am Bezel
Electric In car Fuel pressure gauge (dual MOunt pillar) Multicolor display.
Hurst shifter
Slp Floor mats
Leather scale 1-10 it is a 9.5 easy. I will post pics
Never had dynoed , but this thing is nice, I have no doubt that if you ride in it you will be satisfied. Never been sprayed and only went to the track once, but could not get a good enough pass to get a good time. (wheel hopping)
I do have other stuff like draglites and tires and Nitrous if wanted not included. I can also take some of the stuff off if you want it removed to lower the price.
I will post pics as time go on.
Asking 15000.00.
Thanks
2001 M6 Red Camaro SS
Brand New Lq9 with only 700 miles since rebuilt.
60,000 miles on the frame
Ebony interior
Done the wide open throttle tune on a mustang dyno and it Made 450/420 hp/tq wich is equal to about 470/440 on a dynojet.If i get a chance I will go back to a dynojet to verify these numbers.
Tsp Edelbrock Terminator Heads with dual springs
ARP Head Bolts
T-Rex cam
Hardend Pushrods
Fast 90mm Intake
Fast 90mm TB
42lbs SVO injectors
Professoinal Product Fuel Rails
ARP Rod Bolts
Bulldawg Double Roller Timing Chain
SLP underdrive pulley
SlP Lid
K&N filter
Cold air intake mod
Engine coolant bypass mod
Walbro 255 fuel pump
It is sd tuned, but I have a 80mm maf if you rather have that.
Supension
Pro 5.0 Shifter
Textrilla clutch
Spec Billet Flywheel + Arp Flywheel bolts
Both balanced together
4:10 Gear
Bmr adjustable tq arm
adjustable lca's
adjustable Panhard bar
Drilled slotted rotors
Painted red calipers with ss deacal
18" Boyd Blaster wheels. Highly polished
265/40/18 and 295/35/18
Exhaust
Hooker Coated 1 3/4 headers
Tsp y with a custom Flowmaster Merge collector
Slp loudmouth exhaust
Flow master Muffler
Two Cutouts
Interiour
Aem WIdeband
Corvette Dash overlays
Trans Am Bezel
Electric In car Fuel pressure gauge (dual MOunt pillar) Multicolor display.
Hurst shifter
Slp Floor mats
Leather scale 1-10 it is a 9.5 easy. I will post pics
Never had dynoed , but this thing is nice, I have no doubt that if you ride in it you will be satisfied. Never been sprayed and only went to the track once, but could not get a good enough pass to get a good time. (wheel hopping)
I do have other stuff like draglites and tires and Nitrous if wanted not included. I can also take some of the stuff off if you want it removed to lower the price.
I will post pics as time go on.
Asking 15000.00.
Thanks
