98 c5 w/ extras
10-12-2010, 04:30 PM
#1
Launching!
Thread Starter
iTrader: (7)
Join Date: Apr 2006
Location: Fort stewart GA
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
98 c5 w/ extras Just testing the waters seeing whats up. I will most likely not even sell because I know I won't get even close to what I spent on the car.
98 Targa top TR light gray interior 30k on the clock
Mods
Forged bottom end
Mahl dished pistons
stock crank
(I got all the connecting rods and other things just can't remember the brand right now)
LG Motorsports Street series long tube headers with off road x pipe
ARP Head studs along with other bolts and studs various parts again can't remember at the top of my head.
317 heads w/ patriot dual gold springs
z06 cam
borla cat back
Built a4 by xtreme performance supposedly can handle 650hp+
Kenne Bell 2.8l w/3 in pulley
60 lb injectors
upgraded fuel pump( again can't remember brand bought over a year ago)
I think thats about it performance wise.
VIS carbon fiber cowl hood
Dual gauge a pillar pod
AEM Widebrand
Autometer carbon fiber boost gauge.
17x9.5 chrome c5 z06's up front with run flats
18x10.5 in the rear also with run flats.
Car is currently being put together with the blower install. Just trying to get a ball park figure again I don't need to sell it just keeping my options open. Car hasn't been run or even started for that matter with the current set up so no numbers aren't out. Also I am in Hawaii car is in Kentucky and the last parts I bought were over a year ago so that is why I can't remember the brand of certain parts. I think thats about it, Im sure some other small details or whatnot may pop up.
Thanks Brent
98 Targa top TR light gray interior 30k on the clock
Mods
Forged bottom end
Mahl dished pistons
stock crank
(I got all the connecting rods and other things just can't remember the brand right now)
LG Motorsports Street series long tube headers with off road x pipe
ARP Head studs along with other bolts and studs various parts again can't remember at the top of my head.
317 heads w/ patriot dual gold springs
z06 cam
borla cat back
Built a4 by xtreme performance supposedly can handle 650hp+
Kenne Bell 2.8l w/3 in pulley
60 lb injectors
upgraded fuel pump( again can't remember brand bought over a year ago)
I think thats about it performance wise.
VIS carbon fiber cowl hood
Dual gauge a pillar pod
AEM Widebrand
Autometer carbon fiber boost gauge.
17x9.5 chrome c5 z06's up front with run flats
18x10.5 in the rear also with run flats.
Car is currently being put together with the blower install. Just trying to get a ball park figure again I don't need to sell it just keeping my options open. Car hasn't been run or even started for that matter with the current set up so no numbers aren't out. Also I am in Hawaii car is in Kentucky and the last parts I bought were over a year ago so that is why I can't remember the brand of certain parts. I think thats about it, Im sure some other small details or whatnot may pop up.
Thanks Brent
