96' Z28 Fresh engine and trans
06-21-2014, 06:24 PM
#1
Staging Lane
Thread Starter
Join Date: Dec 2013
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
96' Z28 Fresh engine and trans The car has a brand new freshly built LT1 with a CC306 cam and heads that have been cleaned up a bit. The motor has new bearings, eagle crank, stock rods and pistons with new rings. ARP bolts on the mains, heads and rods. Melling oil pump, cloyes chain. Valve train has ls7 lifters, new pushrods, scorpion 1.7's, comp 918's with comp retainers, keeps and locks. Brand new opti with the mitsubishi optical sensor. Brand new waterpump, alternator, starter. Mostly all new sensors (MAF, O2's, Water temp, list goes on). Pacesetter longtubes with custom 3.5" ORY with a pro-flo twister muffler. The heads have new Ferrea valves, guides have been honed and heads were resurfaced. 12:1 static compression. Brand new 4l60e, 750hp kit from Dana and probuilt automatics. 3500 stall converter. Tuned by Mayhem in Raleigh.
Less than 1000 miles on the engine and less than 500 on the trans
In the video I outline a spot where the previous owners wife hit the car in the driveway. Didnt push in or crack any body panels only the paint
Overall the car is in good shape, the paint was redone by the guy i bought it from and isn't the best paint job but it looks pretty damn good from a few feet back.
VIDEO:
Less than 1000 miles on the engine and less than 500 on the trans
In the video I outline a spot where the previous owners wife hit the car in the driveway. Didnt push in or crack any body panels only the paint
Overall the car is in good shape, the paint was redone by the guy i bought it from and isn't the best paint job but it looks pretty damn good from a few feet back.
VIDEO:
