01 ws6
12-05-2015, 05:05 PM
#1
On The Tree
Thread Starter
iTrader: (34)
Join Date: Oct 2006
Location: DETROIT, MI
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
01 ws6 thinking of selling my 01 ws6 as a roller.. don't know what to ask..
01 ws6 black/ebony rear seats out (still have)
custom 1 off true dual 3" 304 stainless exhaust over the axle and out the back with corsa clones ($3100 the nicest exhaust ive seen on a 4th gen)
edelbrock 1 7/8" to 3" inch long tubes
dts 12 bolt 31 spline axles strange spool with 3:73 and relocation kit
bmr k member with adjustable upper and lower a-arms
bmr adjustable torque arm
bmr adjustable rear lower control arms
adjustable panhard rod
spohn front and rear sway bars
strange 10 way adjustable shocks/struts/ front coil over springs
17x9.5 direct bolt dark stars (new) front new nitto 275's
15x10 direct bolt dark stars (new) rear with 295' mickey Thompson drag radials 2 passes and 30 street miles
alky control meth kit
behind bars race car's custom 4th gen tank/sending unit/sumped ($800 tank) new
chromoly lower core support custom made to stand up radiator and intercooler
had a 6 point cage that went through the floor to the frame, but I cut the door bars out since I was going to daily drive it (can easily be put back)
all unnecessary wiring etc taken out (have a complete body harness to go with it) everything still works as it should
hvac box removed and bmr plate installed (still have the unit)
custom steering wheel (still have the factory and air bags)
may be more I'm forgetting car has been 159 mph in the 1/4
ext about 7.5-8/10 interior the same 93k original miles no accidents clean car fax
01 ws6 black/ebony rear seats out (still have)
custom 1 off true dual 3" 304 stainless exhaust over the axle and out the back with corsa clones ($3100 the nicest exhaust ive seen on a 4th gen)
edelbrock 1 7/8" to 3" inch long tubes
dts 12 bolt 31 spline axles strange spool with 3:73 and relocation kit
bmr k member with adjustable upper and lower a-arms
bmr adjustable torque arm
bmr adjustable rear lower control arms
adjustable panhard rod
spohn front and rear sway bars
strange 10 way adjustable shocks/struts/ front coil over springs
17x9.5 direct bolt dark stars (new) front new nitto 275's
15x10 direct bolt dark stars (new) rear with 295' mickey Thompson drag radials 2 passes and 30 street miles
alky control meth kit
behind bars race car's custom 4th gen tank/sending unit/sumped ($800 tank) new
chromoly lower core support custom made to stand up radiator and intercooler
had a 6 point cage that went through the floor to the frame, but I cut the door bars out since I was going to daily drive it (can easily be put back)
all unnecessary wiring etc taken out (have a complete body harness to go with it) everything still works as it should
hvac box removed and bmr plate installed (still have the unit)
custom steering wheel (still have the factory and air bags)
may be more I'm forgetting car has been 159 mph in the 1/4
ext about 7.5-8/10 interior the same 93k original miles no accidents clean car fax
