Need help Weld Draglite 15x3.5
#1
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Jan 2007
Location: Levittown PA
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
Need help Weld Draglite 15x3.5
I got a sweet deal on some 15x3.5 Weld draglites with tires. When I got them home and went to mount them to see if I needed a spacer. I discovered my wheel studs are about 1/4" short from even being flush with the outside of the wheel, and they don't even fit the hub tight. I knew they were multi pattern but figured I just needed spacers. Does anyone know 1. Will these wheels even work on my '98? 2. What do I need to make them fit? 3.Where can I get these parts? Sponsor? The only # on the wheel is 15-01
Please don't be a dick and say search, I did and came up with nothing useful.
Thanks in advance.
J
Please don't be a dick and say search, I did and came up with nothing useful.
Thanks in advance.
J
#3
11 Second Club
iTrader: (27)
Join Date: May 2005
Location: Your girl's back door giving her the long stroke while you're at work
Posts: 6,801
Likes: 0
Received 3 Likes
on
3 Posts
You are gonna have to grind the caliper to make them fit. It's also a good idea to get longer studs and most run a 5/16" spacer
#7
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Jan 2007
Location: Levittown PA
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
Ok I ended up ordering the 5/16" spacer, 1.380" Weld lugs, and the ARP 2.5" studs. I"ll try to take pics step by step for other guys in the future. I'm hoping the 2.5"'s are long enough, either way we'll see.