Need help, been ignoring an issue
#1
Launching!
Thread Starter
iTrader: (5)
Join Date: Jun 2007
Location: Richmond, VA
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Need help, been ignoring an issue
I bought a set of Weld Pro Stars, 15X10 w/ 7.5" backspacing for the rear, and another set of Pro Star 15X4 w/ 1 7/8" backspacing for the front. I've had 2 different people try to grind the front calipers down and tell me those wheels will NOT work (for the front)
But I got those numbers off this forum... Does anyone know for sure, if those 15X4's will fit up front? I know there is a large amount of grinding needed, and neither of these guys are F-body people... So maybe they just arent aware of how much needs to come off... but before I start the process of sending these wheels back to JEGS, I'd like to find some sort of definite answer
Thanks!
But I got those numbers off this forum... Does anyone know for sure, if those 15X4's will fit up front? I know there is a large amount of grinding needed, and neither of these guys are F-body people... So maybe they just arent aware of how much needs to come off... but before I start the process of sending these wheels back to JEGS, I'd like to find some sort of definite answer
Thanks!
#4
Launching!
Thread Starter
iTrader: (5)
Join Date: Jun 2007
Location: Richmond, VA
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
I bought the wheels off JEGS and the only 15x4 they offered with our bolt pattern was the 1 7/8" backspacing... i could use a spacer if it would help, because I did buy all new ARP wheel studs