Wheel Questions
#1
Launching!
Thread Starter
iTrader: (6)
Join Date: Nov 2008
Location: Emporia, Ks
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
Wheel Questions
What are the sizes and specs on a stock 98 wheel : offset, backspacing, rearspacing ? bolt pattern is 5x4.75 i know that. Reason asking i am thinking about getting some 15x10s and needing to know what size i should get for these so i can fit a 325 50 15 under my trans am. So i am needing to know what backspacing to get and off set and everything thanks.
#5
12 Second Club
iTrader: (3)
Join Date: Feb 2009
Location: Magnolia, NJ
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
i have weld draglites on my car, didnt have to do any grinding, my rims are 15X10 and have a 7.5 inch backspacing..... with 325/55/15r drag radials which measure 13.25 inches wide.... no work to the wells ether... i love it, have a big tire on there with no mods..... sometimes if you have ppl in the back seat when taking turns it would rub.... i put air bags in the coil springs above the rear, they were 80$ and help launches when drag racing... so i won again with them now no problems with rubbing and all fits great... front rims are 6x15 with a 3.5 back spacing i believe as well..
#6
12 Second Club
iTrader: (2)
Join Date: Apr 2005
Location: Kansas City MO
Posts: 1,054
Likes: 0
Received 0 Likes
on
0 Posts
i have weld draglites on my car, didnt have to do any grinding, my rims are 15X10 and have a 7.5 inch backspacing..... with 325/55/15r drag radials which measure 13.25 inches wide.... no work to the wells ether... i love it, have a big tire on there with no mods..... sometimes if you have ppl in the back seat when taking turns it would rub.... i put air bags in the coil springs above the rear, they were 80$ and help launches when drag racing... so i won again with them now no problems with rubbing and all fits great... front rims are 6x15 with a 3.5 back spacing i believe as well..