Post up Pewter T/A's!!!!
#21
TECH Apprentice
iTrader: (6)
Join Date: Oct 2008
Location: Philly, Pa
Posts: 361
Likes: 0
Received 0 Likes
on
0 Posts
Nice looking rides guys.
I'm gonna be going with the C5 DD's in machined face once OEwheels comes out with the 18x9.5 for the fronts.
Havn't seen anyone with the C5s in machined face in the 17-18 combo yet.
Should look pretty good.
I'm gonna be going with the C5 DD's in machined face once OEwheels comes out with the 18x9.5 for the fronts.
Havn't seen anyone with the C5s in machined face in the 17-18 combo yet.
Should look pretty good.
#24
Staging Lane
Join Date: Apr 2009
Location: Fort Worth Texas
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Nice pics but were can i get the Center Bird square that goes in the front my T/A looks horrible without it. I would appreciate it if anyone lets me know were Thanks
#28
UNDER PRESSURE MOD
iTrader: (19)
I'm guessing he was referring to the hyperdark color. Trust me, I debated for a few months over new wheels. I had sold my HP evo's, and new I wanted another set of 19s, and i kept going back and forth with getting the CCW's vs these. What sold me on the Ruff's, ease of cleaning and less than half the cost. I took that savings and bought a 4 post lift for the garage and still had some badass looking wheels. Now if I could get a set of CCW's that were clear coated or chromed, I might jump on them. I also liked how the spokes on the Ruffs were smoother along the edges compared to the CCWs which have more of a sharp, 90 degree angle.
To each his own.
Thanks for the compliments either way.
To each his own.
Thanks for the compliments either way.
#30
TECH Enthusiast
iTrader: (4)
I'm guessing he was referring to the hyperdark color. Trust me, I debated for a few months over new wheels. I had sold my HP evo's, and new I wanted another set of 19s, and i kept going back and forth with getting the CCW's vs these. What sold me on the Ruff's, ease of cleaning and less than half the cost. I took that savings and bought a 4 post lift for the garage and still had some badass looking wheels. Now if I could get a set of CCW's that were clear coated or chromed, I might jump on them. I also liked how the spokes on the Ruffs were smoother along the edges compared to the CCWs which have more of a sharp, 90 degree angle.
To each his own.
Thanks for the compliments either way.
To each his own.
Thanks for the compliments either way.
#31
UNDER PRESSURE MOD
iTrader: (19)
The lift wasn't bad, ~$2100 to my door. What was expensive was vaulting the ceiling in the garage, and then converting the garage door from extension springs to coil springs, and then getting a new opener that mounts on the side of the door.
All together, it cost me about $4000 with me doing the work, but it's well worth every penny come the winter and it's 15 degrees out and I can store the T/A in the air, and my car is a comfortable 50 degrees and my wife can get her car in the garage as well.
All together, it cost me about $4000 with me doing the work, but it's well worth every penny come the winter and it's 15 degrees out and I can store the T/A in the air, and my car is a comfortable 50 degrees and my wife can get her car in the garage as well.