New wheel/tire setup...
New wheel/tire setup... So I picked up my new wheel/tire setup from a member on here about two weeks ago. Im waiting to get them installed, but I need to order my bmr street lcas, roll my fenders, bfh the inner wells, and cut the bumper stops. My car is pretty much stock, would I need a panhard bar? I was thinking I would only need if it I plan on lowering car.
Front: 17x6 with sumitomo htrz 205-45-17
Rear: 17x11 with m&h racemaster 325-45-17
Front: 17x6 with sumitomo htrz 205-45-17
Rear: 17x11 with m&h racemaster 325-45-17
Ahh I wanted to buy his setup but didn't have the $$$. Good luck with it.
You may or may not need the adjustable panhard bar. Once you get the wheels on, if one side has clearance and the other doesn't, then there ya go.
You may or may not need the adjustable panhard bar. Once you get the wheels on, if one side has clearance and the other doesn't, then there ya go.
Was thinking that I was going to have problems with a fitments since the rear tires are soo tall. So I went ahead and order BMR Adjustable LCAs and Adjustable Panhard Bar since I do plan on lowering the car over time. So the wheels should be on in about a week or so. 
Nice looking tire and wheel combo.
It's great that there are now choices for guys with 17's who like to drag race...
Let me know if you have any questions regarding the install of your BMR products.
Oh and we definitley need pic's
It's great that there are now choices for guys with 17's who like to drag race...
Let me know if you have any questions regarding the install of your BMR products.
Oh and we definitley need pic's
