z06 rims back ordered.
Thread Starter
11 Second Club
Joined: Apr 2003
Posts: 630
Likes: 0
From: Maui, Hawaii
z06 rims back ordered. Wassup guys, I was wondering if Im the only one thats waiting for the 18x10.5 53mm offset and 18x9.5 50mm offset zo6 wheels. Ive been waiting for a month 1/2 then finally rims comes in, but guess what, they sent me the wrong offsets 
so now Im sending the rims back, who knows maybe a month more of waiting 
, and my tires have been sitting for almost 4 months. Just venting out. I Guess itll be worth all of this waiting when z06 wheels are on. Laters
Mark
so now Im sending the rims back, who knows maybe a month more of waiting , and my tires have been sitting for almost 4 months. Just venting out. I Guess itll be worth all of this waiting when z06 wheels are on. LatersMark
My car sat in the shop 6 weeks before I found out that they were on backorder. I had a flat when I put it in there to get my ground effects repainted so I had them order the rims. I've been riding my CBR 600 around in the freezing cold for nothing. Found an old tire today and had them stick it on the rim so I could drive it...Then found a bolt in my front left. I'm now riding around with a 245/45 on the back right and a plugged left front. Looking for some different rims.
TECH Fanatic
Joined: Aug 2003
Posts: 1,010
Likes: 0
From: Winchester, VA
1320 perfomance:
I have a question about the offsets that you have ordered. I am going with the same size setup with 275/35/18 in the front and 295/35/18 in the rear. My questions are, first off what size tires are you putting on, and second with these offsets and my tire selections will I rub? I am trying to find the correct off sets so that I do not have to mangle my fenders or wheel wells.
Oh yeah, where is a good place to order these rims w/ these offsets from?
Thanks and any information will be appreciated.
Fry
I have a question about the offsets that you have ordered. I am going with the same size setup with 275/35/18 in the front and 295/35/18 in the rear. My questions are, first off what size tires are you putting on, and second with these offsets and my tire selections will I rub? I am trying to find the correct off sets so that I do not have to mangle my fenders or wheel wells.
Oh yeah, where is a good place to order these rims w/ these offsets from?
Thanks and any information will be appreciated.
Fry
