Summit Wheels???
Summit Wheels??? Been looking at the Summit brand of wheels for my T/A I see that there is only a 6.5 BS in the 15x10 Im wondering if they would stick out of the fender wheels or will they sit flush in the rear? I know it depends on tire with as well but what do you guys think anyone running a 6.5 BS on the 4th gen F-Bodys????
Thanks in Advance.
Thanks in Advance.
Trending Topics
So deviant I take it those are with 6.5 BS.....just wondering myself because not sure the BS on my z06 rims but I run a 1" spacer on mine and I'm flush with my fenders so I was thinking 6.5 would run flush
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
speaking from experience with both my old 98 Camaro & my current 02 Trans Am, a Camaro with 15x10 requires a 7.5 backspacing while a Trans Am/Formula can get away with a 6.5 backspace. i run 27x11.50-15 Hoosier QTPs on my car & they do not stick out at the top. don't get me wrong, it's close but very do-able.
Last edited by Nsty98LS1; Mar 7, 2011 at 07:51 PM. Reason: spelling
hard to tell from this pic, but this is a 15x10 with 6.5 backspace on my car. it don't hang out the top of the wheelwell. now on a Camaro, it's gonna hang out, a lot. i'll try to dig up a better pic showing this
