Post some pic's of your DR set ups!!
Post some pic's of your DR set ups!! hey guys...im about to pull the trigger on a set of 325/50/15 DR for my 98 z28, but just wanted to see some set ups of people running these, how you guys like them? how much modding you have to do to fit them? would you go any other route if you could do it again? i've seen a couple but must of them on T/As and they look sick....post some picsss!!!!!!
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
I might need to upgrade one of these days. 
Thats the same thing i wanna do on mine...i also have the rear narrowed 3" per side with 15x10 on a 4.5 BS ...how much modding you had to do to fit them, and how do you like those big 325?, i read they are a bit heavy with a bigger rotational mass
I had to roll the outer fender lips, BFH the bejesus out of the inner fenders, adjustable panhard & LCA's. They still rub a little bit if I make a sharp turn, because I have a spool and poly suspension bushings that deflect as the axle tries to twist. The 325's are my "street" tires and I run a 28x12.50 bias ply at the track.
