Y2K EXACT fit...
Y2K EXACT fit... Hey guys, I've read almost all of the above stickied threads, and I still have a couple of questions to do with my exact fitment for Y2K 18x9.5 wheels. I now understand what offset means, and understand that this is either going to allow the rim to "sink" into the fender well (and not look right), or stick out of the wheel well (and also not look right).
I've got the "factory" SLP ZR1 wheels, and IMO, they are sunk a little bit too far into the wheel wells. When I get new Y2K wheels, I'd like them to be almost flush with the tops of the fender wells (the part that sticks out a little bit). So they would actually be set out a little.
What offset would I need to accomplish this on front and rear for an 18x9.5? Would a 50mm offset stick out too much? If not, would 50 work for the front AND rear? I'm looking for an agressive stance.
Thanks a lot for the help!!!
I've got the "factory" SLP ZR1 wheels, and IMO, they are sunk a little bit too far into the wheel wells. When I get new Y2K wheels, I'd like them to be almost flush with the tops of the fender wells (the part that sticks out a little bit). So they would actually be set out a little.
What offset would I need to accomplish this on front and rear for an 18x9.5? Would a 50mm offset stick out too much? If not, would 50 work for the front AND rear? I'm looking for an agressive stance.
Thanks a lot for the help!!!
Well..you wont come out much farther than stock..but the 50's will be slightly more agressive. On a 9.5 you can go as agressive as a +38 all around...but no one makes what you want in that offset.
