V-Hol383

if anyone is running a 2- 3 inch lip on their rear wheels on a stock rear end please post pics or let me know how they fit with the wheel wells. im wanting to go 3 inches but dont see it being able to work with how low i want to go any feed back in appreciated.

82cetuner

iTrader: (9)

i doubt 3 inches is going to be possible but you might can come close, it depends on the wheel a TT2 will not hardly look deep dish at all since it has a extra roll on the lip, but another type of wheel might show more. i cant give you pics of my car to compare since i have a narrowed rear but I did take about 2.25 off each side and run a 5.5 backspace on 11 inch rim so I have about 5 inches of dish on my rims

WS6 What

iTrader: (16)

id like to see some pics of your wheels, 82cetuner? As my rear is narrowed 1.25 both sides.

Rise of the Phoenix

iTrader: (27)

My CCW 505a's have a 2 inch lip up front and a 3 inch lip out back. I'm on a stock rearend.

V-Hol383

AWESOME! because im going with ccw classics and would love to get atleast a 2.5 in lip out of the rear. can you send any pics?? and whats the offset??

VinR1

iTrader: (17)

17x10.5 TTMs have a close to 3" lip... If you want more, you'll have to increase the diameter and get a wheel with spokes that are convex and bend back towards the brakes giving the false impression that the wheel is truly deep dish... like RPM 505s for example

VinR1

iTrader: (17)

here ya go - mine are 19x8.5 with a 3" lip and 38mm offset. You could easily fit the 9.5" ones, same offset and have closer to a 4" lip. Search for Chaman's car

peterlawl84

iTrader: (12)

Not sure on sizes you are looking for, but you should look at staggered TSW's. Here are mine, front has ~ 1.75" lip, rear ~ 3" lip. Car is lowered on stranos too with a stock length rearend.

PGUFF

iTrader: (12)

I bet those look amazing in person.