Weld prostar question
Thread Starter
On The Tree
Joined: Oct 2011
Posts: 156
Likes: 0
Weld prostar question Looking at a set of prostars.....will they fit?
Fronts are 15x4" with a 1.75" backspace with 26x7.5x15 Mickey Thompson front runners
Rears are 15x8" with a 4.5" backspace with 295x50x15 Goodyear Eagle GTII's
They will be going on a 4th gen ss camaro....thanks in advance
Fronts are 15x4" with a 1.75" backspace with 26x7.5x15 Mickey Thompson front runners
Rears are 15x8" with a 4.5" backspace with 295x50x15 Goodyear Eagle GTII's
They will be going on a 4th gen ss camaro....thanks in advance
Thread Starter
On The Tree
Joined: Oct 2011
Posts: 156
Likes: 0
Stock suspension, with rear lower control arms and an adj. Panhard bar. I have read i might need to grind down the caliper on the rears alittle....and other info you guys can help with? Please.....
Any help would be awesome here...... 
11 Second Club
iTrader: (27)
Joined: May 2005
Posts: 6,799
Likes: 5
From: Your girl's back door giving her the long stroke while you're at work
rears aren't going to work for sure
Most run a 15x3.5 with 1.75" backspacing or a 15x4 with 2.25" backspacing on the front
Most run a 15x3.5 with 1.75" backspacing or a 15x4 with 2.25" backspacing on the front
