Concave Wheels
Damn son, they are going to look BAD *** for sure. I like concave wheels, but for me, without "lip" they just don't look all that great. Can't wait to see what yours look like. Make sure to post up pics in here and make a whole other thread too.
These were made by a small wheel company out in California. Made to my specs. They have deep concave forgings front and rear which I don't believe have been done before. As far as I know, these are the only set in existance..
18x9's in front 18x12's in the rear with Toyo R888's 335/30/18's. Had to mini tub the car to fit the rears but you would never know by looking inside the car. Still have rear seats and seat belts.
Thanks for the compliments guys...I took a risk on these and glad they turned out as good as they did.
Some more pics.
18x9's in front 18x12's in the rear with Toyo R888's 335/30/18's. Had to mini tub the car to fit the rears but you would never know by looking inside the car. Still have rear seats and seat belts.
Thanks for the compliments guys...I took a risk on these and glad they turned out as good as they did.
Some more pics.
Glad to see the 3rd gen is getting some attention. Ive seen it in person and its by far the best 3rd gen around. Perfect candidate for Camaro Performers IMO. Looks good and goes fast.
TECH Apprentice
Joined: Feb 2005
Posts: 364
Likes: 0
From: Newark,DE
I thought I did this but I guess not. So here is the picture update. Sorry for the cell pics. I will get better ones with the SLR when I get a few minutes and start the thread with those.
I settled on full polished with clear coat for easy maintenance.
[img]
I settled on full polished with clear coat for easy maintenance.
[img]
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Thread Starter
TECH Enthusiast
Joined: Feb 2012
Posts: 631
Likes: 0
From: Orlando
Seriously dude, by the time im done driving this for the weekend your going to have to clean all your seats off if you know what I mean. 
Your car is definitely a panty peeler! Just my personal preference I would lower is about 1/2 an inch.
Your car is definitely a panty peeler! Just my personal preference I would lower is about 1/2 an inch. Thread Starter
TECH Enthusiast
Joined: Feb 2012
Posts: 631
Likes: 0
From: Orlando
[QUOTE=dws6;17551117]I thought I did this but I guess not. So here is the picture update. Sorry for the cell pics. I will get better ones with the SLR when I get a few minutes and start the thread with those.
I settled on full polished with clear coat for easy maintenance.
Love the deep dish in the rear. What size wheels and tires are in rear?
I settled on full polished with clear coat for easy maintenance.
Love the deep dish in the rear. What size wheels and tires are in rear?
TECH Apprentice
Joined: Feb 2005
Posts: 364
Likes: 0
From: Newark,DE
[QUOTE=93Euphoria;17596173] 19x10.5 / 305/30 tires in the rear
I thought I did this but I guess not. So here is the picture update. Sorry for the cell pics. I will get better ones with the SLR when I get a few minutes and start the thread with those.
I settled on full polished with clear coat for easy maintenance.
Love the deep dish in the rear. What size wheels and tires are in rear?
I settled on full polished with clear coat for easy maintenance.
Love the deep dish in the rear. What size wheels and tires are in rear?
I'm hoping to do the same with the black concave look soon as well. I'm hoping it will settle my need to think I need to have a GTR or something 100k+ to have the same looks.
These are 18x10 +42 in the front and 18X11 +43 in the rear. I will get some more pictures this week in the daylight. I was running out of light in these.
I did have to hammer the rears and tweak the panhard just a bit, but these fit like a glove with the 315/35/18 Hoosiers on.
I did have to hammer the rears and tweak the panhard just a bit, but these fit like a glove with the 315/35/18 Hoosiers on.
Thread Starter
TECH Enthusiast
Joined: Feb 2012
Posts: 631
Likes: 0
From: Orlando