White WS6- C5 DD installed
Thread Starter
On The Tree
iTrader: (2)
Joined: Nov 2003
Posts: 156
Likes: 0
From: Pensacola Florida
White WS6- C5 DD installed I just put on new Bmr front springs. The car has yet to be driven so the front may settle a bit more. I removed the isolators from the rear but it is still WAY too high. I ordered springs for the rear and will be installing those this weekend. So far, I do like the wheels.
Thread Starter
On The Tree
iTrader: (2)
Joined: Nov 2003
Posts: 156
Likes: 0
From: Pensacola Florida
Thanks. I think I am going to buy 18 inch fronts once they are in stock. These will fit the bill for now. Should look MUCCCHH better once the rear is lowered a little bit.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Thread Starter
On The Tree
iTrader: (2)
Joined: Nov 2003
Posts: 156
Likes: 0
From: Pensacola Florida
Car is lowered with BMR springs all around. The front wheels are 17x9.5 with 3/4 billet wheel spacers and longer ARP studs. They were WAY too tucked without spacer.
Sorry for the terrible quality pics. Light rain + overcast + phone camera = terrible
