Forgestar CF5's are on the Trans Am!
Thread Starter
ЯєŧąяĐ Єl¡m¡иąŧøя ™
iTrader: (18)
Joined: Nov 2004
Posts: 16,083
Likes: 4
From: Justin, TX
Forgestar CF5's are on the Trans Am! These are 18x10 +42 in the front and 18X11 +43 in the rear. I will get some more pictures this week in the daylight. I was running out of light in these.
I did have to hammer the rears and tweak the panhard just a bit, but these fit like a glove with the 315/35/18 Hoosiers on.
PICS DOWN THE PAGE A WAYS.
I did have to hammer the rears and tweak the panhard just a bit, but these fit like a glove with the 315/35/18 Hoosiers on.
PICS DOWN THE PAGE A WAYS.
Thread Starter
ЯєŧąяĐ Єl¡m¡иąŧøя ™
iTrader: (18)
Joined: Nov 2004
Posts: 16,083
Likes: 4
From: Justin, TX
I will get some pics in the daylight tomorrow. Stuck at work till after dark today. Fronts touch only at full turn. They are 285's.
Give me a list of what shots you guys want.
Give me a list of what shots you guys want.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
TECH Enthusiast
Joined: Jun 2013
Posts: 523
Likes: 0
From: Illinois, as close to "Normal" as I can get...
Oh damn, I was looking for some RPM505's but I think you just changed my mind!
Post up some side shots
Where did you get them from?
Are they the semi or deep concave?
I dont know if I would go that big on my car but might look at a 18x9 & 18x10 setup.
Post up some side shots
Where did you get them from?
Are they the semi or deep concave?
I dont know if I would go that big on my car but might look at a 18x9 & 18x10 setup.
Thread Starter
ЯєŧąяĐ Єl¡m¡иąŧøя ™
iTrader: (18)
Joined: Nov 2004
Posts: 16,083
Likes: 4
From: Justin, TX
Thanks guys. Like I said, I ran out of daylight. I will get some giant pics for you guys hopefully tomorrow morning. I heard the forecast was showing for freezing rain in my area... 
Prices for the wheels start anywhere from about 1400-1600 for 18's I believe. I got a great deal from a part out on here. Worth it though IMO if you get the right offsets. I know that some of you were wanting a flush look. I have to say, these are about as flush as I would want to go.
Prices for the wheels start anywhere from about 1400-1600 for 18's I believe. I got a great deal from a part out on here. Worth it though IMO if you get the right offsets. I know that some of you were wanting a flush look. I have to say, these are about as flush as I would want to go.
