I'm back with a 2002 WS6 this time
Thread Starter
TECH Enthusiast
Joined: Jun 2012
Posts: 658
Likes: 1
From: Reno,NV
I'm back with a 2002 WS6 this time engine,trans, rear, suspension taken care of, time for new shoes. I'm thinking Forgestar F14 in 19x10 +38 in the front and 19x10 +44 in the rear all wrapped in 305/30/19s. I know people on here run 18x10.5 with 295s on all 4 corners or 17x11 with 315 on all 4 corners. I know BFH and fender rolling will probably necessary it usually is with wide set ups, but I'm just wondering if there is anything else I'm missing that wont allow this to fit.
My suspension set up is as follows
UMI adjustable Panhard
UMI adjustable LCAs
BMR Tubular U&L A-Arms
Koni Yellows
eibach 14" custom spring rates
sway bar less
Car sits about 1.75" lower in front, 2" lower in rear
My suspension set up is as follows
UMI adjustable Panhard
UMI adjustable LCAs
BMR Tubular U&L A-Arms
Koni Yellows
eibach 14" custom spring rates
sway bar less
Car sits about 1.75" lower in front, 2" lower in rear
