mickey radial impressions
#1
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Jan 2003
Location: minneapolis,mn
Posts: 1,104
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I changed from 10.5x27 et streets to the new 275 50 15 et street radials today and what an improvement.The bias ply tire just never worked well with my 6 sp so I thought I'd try these.They are on 15x8.5 convo pros and fit well.
I also changed to radial fronts and found cooper sportmaster glt 165/15 that are 25.33 tall so the abs doesn't go nuts.The car drives much better in normal conditions without 2 ply et fronts flopping around up there.I did pay a weight penalty for this change so it's not all gravy.No track times yet and harlan still is working on my 2 step so no hard data but I can tell an improvment just by seat of the pants in traction.I could never set the 2 step higher than 3500 before blowing off the tires,that has now changed as I eyeballed a launch and it bogged bad at 4000.This could get interesting!
I also changed to radial fronts and found cooper sportmaster glt 165/15 that are 25.33 tall so the abs doesn't go nuts.The car drives much better in normal conditions without 2 ply et fronts flopping around up there.I did pay a weight penalty for this change so it's not all gravy.No track times yet and harlan still is working on my 2 step so no hard data but I can tell an improvment just by seat of the pants in traction.I could never set the 2 step higher than 3500 before blowing off the tires,that has now changed as I eyeballed a launch and it bogged bad at 4000.This could get interesting!