315s from the back
Originally Posted by GeArBaNgEr56
315/35/17, sumitomo HTRZ, 17x11 ZR1
Have any pictures of it from the rear?
Originally Posted by spazzyfry123
What offset are they? Any suspension work done? Any banging-in of the inner fender or anything like that?
Have any pictures of it from the rear?
Have any pictures of it from the rear?
Originally Posted by GeArBaNgEr56
50mm, the suspension is bone stock. I had to bang a little bit, but its nothing hard or serious. I'll try and get some pics of the rear for you guys.
I know some guys are having to actually cut some stuff off, did you have to do any of that? Or did you only bang on the fender a little? No worries man, its a forum your here to ask questions. I was there too, I pmed a bunch of people about my sumi's. I didn't need to cut my bumpstops, I didn't touch them at all. I also didn't roll my fender lips. As long as you jack the car up by the "pumkin" you can fit them with no problems. Then if it rubs just BFH it and you will be ready to go. But if your car is lowered you MAY have rubbing issues a little worse than stock.
i can't understand it...stock suspension, 50mm offset 17x11 ZR-1s, jacked up by the pumpkin and did hafta cut off my snubbers
oh, not great pics, but I like the look...made a big difference
oh, not great pics, but I like the look...made a big difference
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by Fedge
i can't understand it...stock suspension, 50mm offset 17x11 ZR-1s, jacked up by the pumpkin and did hafta cut off my snubbers
Originally Posted by GeArBaNgEr56
No worries man, its a forum your here to ask questions. I was there too, I pmed a bunch of people about my sumi's. I didn't need to cut my bumpstops, I didn't touch them at all. I also didn't roll my fender lips. As long as you jack the car up by the "pumkin" you can fit them with no problems. Then if it rubs just BFH it and you will be ready to go. But if your car is lowered you MAY have rubbing issues a little worse than stock.
Thanks bro! I'll be giving it a shot Tuesday hopefully
Staging Lane
Joined: Jun 2006
Posts: 52
Likes: 0
From: mcallen
i have a 97 ss, and before i got it, my buddy sold the zr1s 9.5/11s to a friend of mine with a 01 z, and they rub, but they didn't on mine. so i don't know what the deal was, he also had to make some cuts with a grinder to get them to fit. now just out of curiosity, i have read the sticky about what wheels and offset to use, and the wheels i have on the car now are the wrong offset, but which is the best all around offset to fit in there just for a say 9" wheel or so, without rubbing. right now i've got a 245 out back, and still rubs when i hit a bump, just no where as bad as the 275s did. sorry for the long post, just don't know much about this wheels size stuff, thanks
mike
mike
I'm looking to buy a set of 315's for the wheels I'm about to have widened. I recently bought new Nitto 555's all the way around. (275/35 front - 285/35 rear) I'm not sure if I want to run a Nitto DR or not. I hate mismatching tires, but I think I can live with it as long as I can find a tire with a smooth side wall. I'm open for recommendations.
Thanks,
Ron.
BTW, would the 285's work well on the front with my new combo? I'm trying to decide which tires to sell.
Thanks,
Ron.
BTW, would the 285's work well on the front with my new combo? I'm trying to decide which tires to sell.
