new ZR1 wheels problem
Thread Starter
Staging Lane
Joined: Jun 2005
Posts: 76
Likes: 0
From: NJ
new ZR1 wheels problem hi i have a 99 ws6 and i just put on the ZR1 wheels. they are black with the crome lip. i have the staggered set up where the rears are 11" wide. i was told that they would fit with no problm, but they rubbed when i put them on. i bought some wheel spacers for now but i want to figure out the problem first. also i noticed that the left wheel sticks out about an inch further then the right wheel. i am not sure what that problem is, but i was thinking that maybe the rear is off center. is that possible. please help me out here, thanks alot.
TECH Apprentice
Joined: Jan 2005
Posts: 388
Likes: 0
From: Norfolk, VA
is the side that is tucked in the side that is rubbing?
Sounds like your panhard is bent or you have a lowered vehicle. Get an adjustable panhard bar so that you can re-center the rear end.
You may also need to massage the inner fenderwell area with a large hammer to gain a little more clearance.
Sounds like your panhard is bent or you have a lowered vehicle. Get an adjustable panhard bar so that you can re-center the rear end.
You may also need to massage the inner fenderwell area with a large hammer to gain a little more clearance.
Adjust. PHB will recenter the rear and the BFH (big fr&!*# hammer) mod will give you the clearance on the inside. Might also need to roll the fender lip on the outside. Seems like its a little different on each car.
