Need help with sanding....
#1
TECH Enthusiast
Thread Starter
iTrader: (34)
Join Date: Aug 2003
Location: Kentucky
Posts: 724
Likes: 0
Received 0 Likes
on
0 Posts
Need help with sanding....
I had new tires put on my ride and the dumbass that changed the tires put a big gash in my rim...I used a dremel to get most of the gash out but you can tell after I finished polishing that the dremel was used. Should I have just used sand paper or what ..... BTW it is about a 2" x 1" area located on the wheel lip.....Any help and I did try searching...
John
John
#4
TECH Addict
Join Date: Mar 2003
Location: Houston, TX
Posts: 2,853
Likes: 0
Received 0 Likes
on
0 Posts
Well depending on how big the gash is, you could start out with a 600 grit, then 800 and then finish it off with 1000 grit. (ALL WET) Then finish it off with some polish. Do a search under "wet sanding wheels" and you'll find plenty of info on doing this.
Good luck
Good luck