problem with installation of BF G-Force Tires
Thread Starter
Teching In
Joined: Oct 2005
Posts: 12
Likes: 0
problem with installation of BF G-Force Tires is this a common problem: putting 275/40/17 BF goodrich G-force KDWs on a stock Camaro SS rim ? The "certified tirerack.com installer" insists he could NOT seal the tire on the rim today.
Please help !
Please help !
Last edited by 2001 black beaSSt; Oct 6, 2005 at 09:29 PM.
everyone has problems with low profile tires on stock SS wheels, i think that there should even be a sticky made about it. the bead tries to seal on this weird inner lip on the rim. have the guy lube up the INNER part of the wheel good (you will see the lip im talking about immediatly) and then air it up, sometimes up to 120psi
Thread Starter
Teching In
Joined: Oct 2005
Posts: 12
Likes: 0
Thanks for the reply.
So apparently this is a common problem with a stock SS set up, and eventually i will find an installer competent enough to do it. I was very worried it just couldn't be done...very relieved
he told me he lubed the heck out of it and pumped it up to 130 psi.....and it wouldn't seal
trying another installer tomorrow.....an official bf goodrich installer
So apparently this is a common problem with a stock SS set up, and eventually i will find an installer competent enough to do it. I was very worried it just couldn't be done...very relieved
he told me he lubed the heck out of it and pumped it up to 130 psi.....and it wouldn't seal
trying another installer tomorrow.....an official bf goodrich installer
