Rim fitment question??

Reply Subscribe

Thread Tools

Search this Thread

Oct 30, 2005 | 09:17 PM

MonsterZ28

Thread Starter

TECH Enthusiast

Joined: Apr 2005

Posts: 696

Likes: 0

From: Middletown, DE

Rim fitment question??

Can i run a 15x12 rim with a 7" b/s, and if thats possible can i fit some indy profile S/Ss on there, 345s. 345/50-15< size, 14.1< sidewall width, 11.8 < tread width. This was measured on a 10" rim, ill be going with 12s if i can, ill go less if it wont fit.

Oct 30, 2005 | 09:21 PM

MonsterZ28

Thread Starter

TECH Enthusiast

Joined: Apr 2005

Posts: 696

Likes: 0

From: Middletown, DE

O or a tire thats-26X12.00R15LT, tread width- 10.5, sidewall width-12.3

Oct 30, 2005 | 10:42 PM

slow3hoe2

TECH Regular

iTrader: (3)

Joined: Aug 2004

Posts: 410

Likes: 1

From: chicago, il

Quote:

Originally Posted by MonsterZ28

a 15 x 12 w/7" bs will be haning out the quarters all ghetto like. unless you narrow the rear end.

Nov 1, 2005 | 03:28 PM

MonsterZ28

Thread Starter

TECH Enthusiast

Joined: Apr 2005

Posts: 696

Likes: 0

From: Middletown, DE

hmmm, how wide can i go without it looking dumb

Nov 1, 2005 | 11:23 PM

slow3hoe2

TECH Regular

iTrader: (3)

Joined: Aug 2004

Posts: 410

Likes: 1

From: chicago, il

Quote:

Originally Posted by MonsterZ28

hmmm, how wide can i go without it looking dumb

most run a 15 x 10wide rim with 7.5" backspacing. if you want to get a real wide tire on there without it sticking out the quarters....either bogart or holeshot (cant remember which) makes a 7.875" bs rim thats 10" wide. that would move the rim in another 3/8" and tuck the tires under the quarters. if that is done...this would take EXTENSIVE heating and hammering on the insides of the wheel wells to clear the tire.

but the most typical is a 10" rim with a 10.5" tire of some sort...fits without much issues.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last