Wheels & Tires Forged | Billet | Cast | Radials | Slicks

Bfh Mod?

Reply Subscribe

Search this Thread

Old

Mar 28, 2007 | 04:18 PM

#1

Thread Starter

11 Second Club

iTrader: (8)

Joined: Aug 2006

Posts: 528

Likes: 3

From: Mass

Default

Bfh Mod?

Hey guys exactly how and where to you bang with this mod I really want the ccw's 18x11 with 315/30 out back but I'm hearing they will rub even though I'm at stock height what do you guys think I'll have to do it?

Old

Mar 28, 2007 | 04:27 PM

#2

10 Second Club

iTrader: (28)

Joined: Feb 2005

Posts: 3,975

Likes: 3

From: KS

Default

You'll probably need to do something similar to this, that's what it took to get my 315's to fit. If you're at stock height it may not need that much, I'm lowered nearly 2".

Old

Mar 28, 2007 | 04:43 PM

#3

Thread Starter

11 Second Club

iTrader: (8)

Joined: Aug 2006

Posts: 528

Likes: 3

From: Mass

Default

Thank you a pic say a thousand words it doesn't seem that hard to do.Oh and 18x10 up front with 275/35's those will fit correct?

Last edited by 02BEAST; Mar 28, 2007 at 04:55 PM.

Old

Mar 28, 2007 | 05:29 PM

#4

TECH Fanatic

iTrader: (1)

Joined: Jul 2005

Posts: 1,682

Likes: 1

From: Earth

Default

You might also want to try and read your way through this thread:
https://ls1tech.com/forums/wheels-tires/683519-am-i-trouble-does-tire-section-width-measure-larger-when-pic.html

Lots of good information in there.

Reply Subscribe

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 09:17 PM.