lowering my car???
Thread Starter
On The Tree
Joined: Dec 2005
Posts: 152
Likes: 0
From: ALACHUA, FL
lowering my car??? okay i need to know if i lower my car 1 1/2 inches maybe 2 inches in the rear, will i have a problem with my tires rubbing the fender if i hit a bump or a speed hump. i have 315,s on the rear. will i have to roll my fender lip. 2. my buddy suggested on getting coil compresser kits to lower my car instead of buying new springs. what is yalls take on that? this ***** kinda new to me so any advise will be greatly appreciated. thanks.
do it once and do it right. dont mess with spring compressor kits.
buy a nice set of lowering springs. once lowered, check to see how 'centered' your rear axle stays. if needed, buy an adjustible panhard to get it centered again...then use the BFH mod on the inside of your fenders and roll the outside edges if you need to.
In suspension mods, there are seldom any 'shortcuts'
buy a nice set of lowering springs. once lowered, check to see how 'centered' your rear axle stays. if needed, buy an adjustible panhard to get it centered again...then use the BFH mod on the inside of your fenders and roll the outside edges if you need to.
In suspension mods, there are seldom any 'shortcuts'
