CCW's arrived !!
Can we get some fender shots? All the pics I have seen of CCW' show the lip of the wheel flush with the outer edge of the fender, which would mean a wrong offset IMO because it looks like they stick out too far
please prove me wrong
http://www.fquick.com/garages/viewga...action=&page=2
IMO, they tuck better than any 18x11 in the back I've seen. So much so that I actually run a 1/4" spacer and ground down my bump stops a little to make sure the inside wheel lip didn't contact it during hard cornering.
http://www.fquick.com/garages/viewga...action=&page=2
IMO, they tuck better than any 18x11 in the back I've seen. So much so that I actually run a 1/4" spacer and ground down my bump stops a little to make sure the inside wheel lip didn't contact it during hard cornering.
That could be. All the pics I see look like this car for example
https://ls1tech.com/forums/wheels-tires/709287-new-shoes-my-feet-ccw.html
Not only do the wheels look like they stick out too far but the tires looked stretched on the rims. Maybe its just that brand of tire but they all seem to have them. I'm not so concerned with the fronts but the rears look too far out to me especially if the tires were to have squared off side walls unlike the BFG's shown in the link above
The Best V8 Stories One Small Block at Time







I have the same size and setup (dif style is all) use to have it dropped with sportlines and had no issues rubbing or bumping.