Post your c6 Zo6 wheels on Camaro's
#26
Staging Lane
Join Date: Jul 2007
Location: Memphis, Tenn
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Here are my C6 ZO6 wheels. The dark grey ones are the ones I tried first, but the front wheels were a different shade of gray than the rears, WTF. So I went with the machined/black, I like them better anyway, b/c they match the car better. Anyway, the fronts are 18X9.5 w/ 275/35/18 BFG KDW's, and the rear are 18X10.5 w/ 295/35/18 BFG Gforce TA DR.
#35
#37
LS1Tech Platinum Sponsor
iTrader: (4)
We have literally sold tens of thousands of these C6 Z06 wheels with no fitment problems on stock vehicles. Today we had a customer with a 1999 Camaro claim to have problems running the 18x10.5 in the rear with a 285-35-18 tire. With lowered vehicles we have experienced problems with the tire hitting the BS, but not on stock vehicles.
Do any of you guys have first hand / unbiased experience with this? We'd like to send our customer out here to read any feedback.
Thanks for your help.
Do any of you guys have first hand / unbiased experience with this? We'd like to send our customer out here to read any feedback.
Thanks for your help.
#38
On The Tree
iTrader: (3)
Might want to post a new thread here OEWheelsLLC.
Every car is different and most here are not scared of using the big ****** hammer to clearance the inner fenders and trim the bump stops. I don't have that setup but i'm sure many do. I run 285/35/18's on oem vette 9.5" with a 1/4" spacer. As long as you dont offer any links to your site or auctions the mods won't have any problems here not being a sponser.
BTW nice to see someone from your company here.
Every car is different and most here are not scared of using the big ****** hammer to clearance the inner fenders and trim the bump stops. I don't have that setup but i'm sure many do. I run 285/35/18's on oem vette 9.5" with a 1/4" spacer. As long as you dont offer any links to your site or auctions the mods won't have any problems here not being a sponser.
BTW nice to see someone from your company here.
Last edited by JDishong; 05-04-2009 at 05:21 PM.