Grinding Calipers Problem
Thread Starter
Teching In
Joined: Nov 2007
Posts: 3
Likes: 0
Grinding Calipers Problem I have been grinding and grinding and grinding. my set up is 15x8 in the back and 15x4.5 in the front. All backspacing is right. I have been working on the fronts because they seem they need more then the fronts. The face of the caliper is hitting the inside of the wheel pretty bad and Ive been grinding but it seems either really slow or not doing anything at all. Im getting some longer shoulder lugs tomorrow because the ones i have are not long enough. I also bought 2 5/16 spaces and tried using them for the front and I still can not get the studs on the caliper side come through the holes in the wheels. Im having really big problems and i need some solutions fast. If anyone has anything about grinding, Post up. I have checked out 101 grinding but that doesn't really help for the fronts. Do I have to get longer studs or can I keep grinding and use longer shoulder lugs.
Please, I really need help. Thanks
Please, I really need help. Thanks
