Wiring Sail Subs in Camaro

Reply Subscribe

Thread Tools

Search this Thread

Dec 20, 2008 | 06:21 PM

Huggerorange73

Thread Starter

11 Second Club

iTrader: (5)

Joined: Sep 2008

Posts: 522

Likes: 0

From: Norridge, IL

Wiring Sail Subs in Camaro

Hey,

I just received the KEE audio replacement speaker package for my 99 Camaro with the Monsoon system.

The Bazooka speaker says it's 4 ohms....I thought I read on here that the Camaro sub is 2 ohms.

Before I install these, I assume that the subs have to be wired on each speaker in parallel to get to the factory 2 ohm spec?

The rest of the install seems pretty painless.....

Thanks in advance for the help!

Dec 21, 2008 | 10:03 PM

KEE AUDIO

Banned

iTrader: (65)

Joined: Sep 2004

Posts: 2,851

Likes: 2

From: Marietta, GA

Hi, I addressed this awhile back but it was on another post. Check out post #7 for the actual diagram (for this it is the top left diagram specifically). They are DVC 4ohm so you just wire them in parallel. Takes about 5 minutes and 12" of speaker wire, 6" for each side if that. Hope this helps you!!

https://ls1tech.com/forums/stereo-el...ack-stock.html

Dec 21, 2008 | 10:26 PM