???window express down module ques.....
Thread Starter
12 Second Club
Joined: Jun 2008
Posts: 2,585
Likes: 3
From: Edmond, OK
???window express down module ques..... is there any way to remove this module and splice wires to where the driver window still moves up and down???
dont need express down and seeing if there is a way to delete the module and splice wires
dont need express down and seeing if there is a way to delete the module and splice wires
Yes, but I would really like to know why? I can't see any benefit.
Either way, schematic:
So basically, take out the PWCM, splice grey to the brown from/to the motor, leave the other brown alone.
Either way, schematic:
So basically, take out the PWCM, splice grey to the brown from/to the motor, leave the other brown alone.
Thread Starter
12 Second Club
Joined: Jun 2008
Posts: 2,585
Likes: 3
From: Edmond, OK
eliminated my express down module and everything works fine, just down have express down
*removed brown wire 341 frm s208 to module (c on module)
*removed blue wire 164 frm s263 to module (a on module)
*spliced grey wire 1136 (e on module) to brown wire 165 (d on module)
*removed brown wire 341 frm s208 to module (c on module)
*removed blue wire 164 frm s263 to module (a on module)
*spliced grey wire 1136 (e on module) to brown wire 165 (d on module)
Last edited by nemss1; Feb 7, 2009 at 05:40 AM.
