Hatch Speakers not working
Thread Starter
Teching In
Joined: May 2007
Posts: 9
Likes: 0
From: North Las Vegas
Hatch Speakers not working So I've looked around and I can't find my answer, so maybe someone can help me. My hatch speaker are not working. I'm getting power to them, but no sound. 4" Alpine-SPS-400. (I have cheeked the speakers and they work) I must assume that it is the stock amp give me the problem , but do I need a new one. Can any one help.
Didn't cheek with a multimeter as it has taken a poop on me. I cheek for power with a light tester. Looking for a multimeter to see what voltage.
Note:
I just replace the HU, Alpine IDA-X100 and front speakers Alpine SPS-600C, added a one (1) sub Rockford Fosgate T110D2, and a Alpine MRP-M500 Amp
and used PAC steering wheel controller.
Didn't cheek with a multimeter as it has taken a poop on me. I cheek for power with a light tester. Looking for a multimeter to see what voltage.
Note:
I just replace the HU, Alpine IDA-X100 and front speakers Alpine SPS-600C, added a one (1) sub Rockford Fosgate T110D2, and a Alpine MRP-M500 Amp
and used PAC steering wheel controller.
A multimeter for signal and continuity would be the first/second step, since your meter is out you have other more labor intensive options.
Let me ask you this stupid question, have you ever heard them play in your car and did you do the radio install?
Let me ask you this stupid question, have you ever heard them play in your car and did you do the radio install?
Thread Starter
Teching In
Joined: May 2007
Posts: 9
Likes: 0
From: North Las Vegas
The have work before when I first got the car. He had some 6X9 but before giving me the car he got me new hatch panels with speaker because be cut the old one to hell to fit the 6X9. the speakers didn't work after that. I thought it was because the speakers were from the junk yard. Yes I did to the install my self. I used an adapter so I would my have to cut the stock harness.
So I've looked around and I can't find my answer, so maybe someone can help me. My hatch speaker are not working. I'm getting power to them, but no sound. 4" Alpine-SPS-400. (I have cheeked the speakers and they work) I must assume that it is the stock amp give me the problem , but do I need a new one. Can any one help.
Didn't cheek with a multimeter as it has taken a poop on me. I cheek for power with a light tester. Looking for a multimeter to see what voltage.
Note:
I just replace the HU, Alpine IDA-X100 and front speakers Alpine SPS-600C, added a one (1) sub Rockford Fosgate T110D2, and a Alpine MRP-M500 Amp
and used PAC steering wheel controller.
Didn't cheek with a multimeter as it has taken a poop on me. I cheek for power with a light tester. Looking for a multimeter to see what voltage.
Note:
I just replace the HU, Alpine IDA-X100 and front speakers Alpine SPS-600C, added a one (1) sub Rockford Fosgate T110D2, and a Alpine MRP-M500 Amp
and used PAC steering wheel controller.
The best thing to do would be download a 60Hz, 1kHz, or whatever signal from the internet, burn it onto a CD or put it in your iPOD, play it, and measure the AC Voltage between + and - on the speaker. You should see 1-10VAC depending on your volume setting. If you do not see anything then run the wires back to the stock amp to see if they are connected properly. If you need a stock amp, I have one that is just sitting in my garage, worked perfectly before I took it out.
