Mounting of Subthump amp rack
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well mine was put in the back with just a couple of screws and it has fallen now.
So here was my plan!
Get a 12" drill bit, hold that sucker in place (after I take the tail lights out) and bore a hole on each side through the wood and metal at the back. Put a proper length bolt through from the outside with a nut on the inside of the metal, slide the amp rack on and use two fancy nuts to hold it in place. Of course I would seal the bolt and all. This way I could take it out if need be and it will never fall again.
Thoughts?
So here was my plan!
Get a 12" drill bit, hold that sucker in place (after I take the tail lights out) and bore a hole on each side through the wood and metal at the back. Put a proper length bolt through from the outside with a nut on the inside of the metal, slide the amp rack on and use two fancy nuts to hold it in place. Of course I would seal the bolt and all. This way I could take it out if need be and it will never fall again.
Thoughts?