Wiring, Stereo & Electronics Audio Components | Radars | Alarms - and things that spark when they shouldn't

Ground question

Old May 11, 2009 | 08:09 PM
  #1  
Vicinity's Avatar
Thread Starter
TECH Fanatic
iTrader: (7)
 
Joined: Dec 2007
Posts: 1,752
Likes: 0
From: FL
Default Ground question



Can I ground using this seat bolt?

Also, how far can I drill into the "hump" that separates the t-top storage spot from the backseats (where the axle and I guess gas tank is)?
Reply
Old May 11, 2009 | 09:45 PM
  #2  
Vicinity's Avatar
Thread Starter
TECH Fanatic
iTrader: (7)
 
Joined: Dec 2007
Posts: 1,752
Likes: 0
From: FL
Default

Bump, I hate being "that guy" that bumps his **** right away, but I need an answer soon.
Reply
Old May 11, 2009 | 10:06 PM
  #3  
pentavolvo's Avatar
TECH Fanatic
 
Joined: Nov 2006
Posts: 1,273
Likes: 1
Default

clean up the paint arond it and ground to it

as far as drilling through that hump i would look under the car and see where it places u, im pretty sure anywhere on that hump puts u at the gas tank
Reply
Old May 11, 2009 | 11:36 PM
  #4  
Engine_HP's Avatar
TECH Fanatic
iTrader: (1)
 
Joined: Jun 2008
Posts: 1,752
Likes: 9
From: Middle East.
Default

Reply
Old May 13, 2009 | 04:42 AM
  #5  
Vicinity's Avatar
Thread Starter
TECH Fanatic
iTrader: (7)
 
Joined: Dec 2007
Posts: 1,752
Likes: 0
From: FL
Default

Originally Posted by pentavolvo
clean up the paint arond it and ground to it

as far as drilling through that hump i would look under the car and see where it places u, im pretty sure anywhere on that hump puts u at the gas tank
Are you sure? I've seen people put amps there before and I'm pretty sure they secured them. I'm really skeptical, though.
Reply
Old May 13, 2009 | 05:24 AM
  #6  
flippincamaro's Avatar
TECH Fanatic
iTrader: (23)
 
Joined: Oct 2004
Posts: 1,364
Likes: 2
From: tn
Default

Yea, man under that hump is the fuel tank.You dont want to drill there, if you do just use very small tapping screws. The tank is about a 1/2 inch under the metal.
Reply
Old May 13, 2009 | 05:26 AM
  #7  
Vicinity's Avatar
Thread Starter
TECH Fanatic
iTrader: (7)
 
Joined: Dec 2007
Posts: 1,752
Likes: 0
From: FL
Default

Damn... how can I mount my amp then? Any ideas?
Reply
Old May 13, 2009 | 05:40 AM
  #8  
flippincamaro's Avatar
TECH Fanatic
iTrader: (23)
 
Joined: Oct 2004
Posts: 1,364
Likes: 2
From: tn
Default

Yup, I made a plate for mine to sit on in my other car when i had it. It went from one side of the back to the other.
Reply
LS1 Tech Stories

The Best V8 Stories One Small Block at Time

story-0

Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?

 Pouria Savadkouei
story-1

Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine

 Verdad Gallardo
story-2

7 Most Reliable High-Performance Engines GM Has Ever Built

 Verdad Gallardo
story-3

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

 Verdad Gallardo
story-4

6 Common C5 Corvette Failures and What's Involved In Repairing Them

 Pouria Savadkouei
story-5

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

 Verdad Gallardo
story-6

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

 Pouria Savadkouei
story-7

Top 10 Most Powerful Chevy Trucks Ever Made!

 
story-8

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

 Verdad Gallardo
story-9

Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

 Verdad Gallardo
Old May 13, 2009 | 05:52 AM
  #9  
95highline's Avatar
Teching In
 
Joined: May 2009
Posts: 7
Likes: 0
Default

take a peice of 1/4" wood (or something close) and pull the carpet back and glue the wood down with silocon or some for of adhesive like that. you could also drill hole into the wood and have bolts comming through the bottom to the top which would match your amp's mounting or use small wood screws that wont go through to far.
Reply
Old May 13, 2009 | 07:50 AM
  #10  
dragonrage's Avatar
TECH Addict
 
Joined: Sep 2006
Posts: 2,591
Likes: 1
From: Massachusetts
Default

3 words: industrial strength velcro

That ground point will work, but why would you use it? Use the large upper bolt of one of the rear seatbelts.
Reply
Old May 13, 2009 | 02:30 PM
  #11  
Johnny-LT1-runner's Avatar
Rockstar
iTrader: (15)
 
Joined: Feb 2009
Posts: 1,582
Likes: 0
From: I'm on a boat! in Shreveport, La
Default

Yeah, the ground will work, i've got mine grounded on the rear passenger seat retaining bolt.
Reply
Old May 13, 2009 | 02:44 PM
  #12  
Engine_HP's Avatar
TECH Fanatic
iTrader: (1)
 
Joined: Jun 2008
Posts: 1,752
Likes: 9
From: Middle East.
Default

Originally Posted by Vicinity
Damn... how can I mount my amp then? Any ideas?
skrew the amp to the carpet.
Reply
Old May 13, 2009 | 04:00 PM
  #13  
Vicinity's Avatar
Thread Starter
TECH Fanatic
iTrader: (7)
 
Joined: Dec 2007
Posts: 1,752
Likes: 0
From: FL
Default

Originally Posted by dragonrage
3 words: industrial strength velcro

That ground point will work, but why would you use it? Use the large upper bolt of one of the rear seatbelts.
Those are both good ideas.

Thanks!
Reply
Old May 13, 2009 | 10:07 PM
  #14  
RedZ99's Avatar
Staging Lane
iTrader: (1)
 
Joined: Jan 2006
Posts: 49
Likes: 0
Default

Just run in in a separate ground wire?
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:18 PM.

story-0
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?

Slideshow: We take a close look at the ONE and Artidiag 800BT2 diagnostic tools from Topdon and the reasons to buy one over the other.

By Pouria Savadkouei | 2026-05-28 11:05:11


VIEW MORE
story-1
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine

Slideshow: The controversial Ferrari F6 swaps its original flat-12 for a Corvette Z06-derived LT4 V8 and sends power to four rear wheels through a custom-built drivetrain.

By Verdad Gallardo | 2026-05-26 18:23:54


VIEW MORE
story-2
7 Most Reliable High-Performance Engines GM Has Ever Built

Slideshow:These GM engines didn't just make huge power, they survived abuse, boost, track days, and six-digit mileage with a reputation for refusing to quit.

By Verdad Gallardo | 2026-05-21 16:45:27


VIEW MORE
story-3
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Slideshow: This heavily modified 1971 Camaro mixes classic muscle car styling with a fifth-generation Camaro interior and modern LS3 power.

By Verdad Gallardo | 2026-05-12 18:06:42


VIEW MORE
story-4
6 Common C5 Corvette Failures and What's Involved In Repairing Them

Slideshow: From wobbling harmonic balancers to failed EBCMs, these are the issues that define long-term C5 ownership and what repairs typically involve.

By Pouria Savadkouei | 2026-05-07 18:44:57


VIEW MORE
story-5
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Slideshow: A modern Camaro transformed into a retro icon, this limited-run "Bandit" build blends nostalgia with brute force in a way few revivals manage.

By Verdad Gallardo | 2026-04-21 13:57:02


VIEW MORE
story-6
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Slideshow: Cadillac didn't just crash the high-performance luxury vehicle party, it showed up loud, supercharged, and occasionally a little unhinged...

By Pouria Savadkouei | 2026-04-16 10:05:15


VIEW MORE
story-7
Top 10 Most Powerful Chevy Trucks Ever Made!

Slideshow: Top ten most powerful Chevy trucks ever made

By | 2026-03-25 09:22:26


VIEW MORE
story-8
Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Slideshow: Hennessey has turned the Silverado ZR2 into a 700-hp off-road monster with supercharged V8 power and a limited production run.

By Verdad Gallardo | 2026-03-24 18:57:52


VIEW MORE
story-9
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

Slideshow: A one-off sports car that looks like a vintage Italian exotic-but hides a C6 Corvette underneath-just sold for the price of a new mid-engine Corvette.

By Verdad Gallardo | 2026-03-23 18:53:41


VIEW MORE