Question about wiring
Question about wiring When I was installing a new clutch the plug that goes in the transmission for the speedometer got ripped off. I have a new connector with 5 inches of wire. What is the best way to connect it back to the harness?
Yea, I'd suggest a structural crimp and then a high quality heat shrink tube over that. (You'll want to keep moisture out. The high quality shrink tubes will continue to constrict as they are subjected to heat.)
The Delphi connectors have a structural crimp and integrated shrink tube, but they require special tools. Probably overkill for this connection. Regular crimps may come loose over time - but these wires shouldn't be life or death. If you get funny results in your speedo over time, you can just check and tweak the crimp.
The Delphi connectors have a structural crimp and integrated shrink tube, but they require special tools. Probably overkill for this connection. Regular crimps may come loose over time - but these wires shouldn't be life or death. If you get funny results in your speedo over time, you can just check and tweak the crimp.
