? -- problems with Turn Signals

Reply Subscribe

Thread Tools

Search this Thread

Dec 10, 2003 | 01:34 PM

speedy_g

Thread Starter

Staging Lane

Joined: Feb 2003

Posts: 63

Likes: 0

From: Kansas

??? - Problem with Turn Signals..

I have a problem with my left turn signals, they will not work when I activate them. I have replaced all the bulbs work and I still get nothing. The arking lights work when I use the switch but the left drl does not. The hazards work but turn does not. Any help would be appreciated.

Last edited by Steve1969LS1; Dec 10, 2003 at 03:28 PM.

Dec 10, 2003 | 01:44 PM

bigMAC

TECH Enthusiast

Joined: Oct 2002

Posts: 553

Likes: 0

From: Long Island, NY

Replace the flasher. I had this same problem about a month ago. The flasher only cost about 3 dollars. The flasher is underneath the steering column by where your knees go.

Dec 10, 2003 | 02:30 PM

Brandon_TA

TECH Fanatic

iTrader: (1)

Joined: May 2003

Posts: 1,124

Likes: 0

From: Houston/Angleton

i just got my car out of the shop for this.. They had to replace my terminals. 3rd time in a year.
Get some new terminals. Driving in the rain will cause this.

Dec 10, 2003 | 03:31 PM

Steve1969LS1

TECH Veteran

iTrader: (1)

Joined: Dec 2001

Posts: 4,274

Likes: 2

From: Anaheim Hills, CA

This might get more help in the electronics forum

Dec 11, 2003 | 07:14 AM

WhiteBird00

Ungrounded Moderator

iTrader: (4)

Joined: Nov 2003

Posts: 11,328

Likes: 344

From: Jacksonville, FL (originally from Toronto Canada)

Quote:

Originally Posted by bigMAC

Replace the flasher. I had this same problem about a month ago. The flasher only cost about 3 dollars. The flasher is underneath the steering column by where your knees go.

If one side works but the other doesn't then it is NEVER the flasher. Both side turn signals run through the same flasher. The system is designed to stop flashing on the side that has a bulb not working. This doesn't mean that it's always a bulb (although that's the most common problem). It could be a corroded socket (especially on the front - they seem to get water in them pretty easily), a bad ground or a broken connection someplace. If you've already replaced the bulb then the next thing to do is have a good look at the socket. If the socket looks OK, use a meter or test light to check for power and ground at the bulb contacts and trace back from there.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last