Capacitor for my Setup?
01-10-2010, 08:24 PM
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: May 2007
Location: Osceola, Indiana
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Capacitor for my Setup? Here is what I will be installing:
2 10" Type R subs in stealth boxes
Type R components in the doors and coaxials in the sails
JL J2 1000WRMS@ 1 Ohm stable Mono amp for the subs
J2 320 4 Channel (4x60RMS @ 4 ohm) to run the speakers.
A 2 farad cap should be plenty right? I was looking at this one http://www.buy.com/prod/power-acoust...207503021.html
There all gonna be about the same right? Would I benifit from a different one and why? Also, with this setup I shouldnt have any problems with the stock charging system right? I am not gonna have it cranked up all the time anyway.... Thanks!
2 10" Type R subs in stealth boxes
Type R components in the doors and coaxials in the sails
JL J2 1000WRMS@ 1 Ohm stable Mono amp for the subs
J2 320 4 Channel (4x60RMS @ 4 ohm) to run the speakers.
A 2 farad cap should be plenty right? I was looking at this one http://www.buy.com/prod/power-acoust...207503021.html
There all gonna be about the same right? Would I benifit from a different one and why? Also, with this setup I shouldnt have any problems with the stock charging system right? I am not gonna have it cranked up all the time anyway.... Thanks!
01-11-2010, 12:04 PM
#4
TECH Enthusiast
iTrader: (21)
Join Date: Oct 2008
Location: DFW
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
Caps are COMPLETELY useless. Its actually harder on your electrical system. Its a waste of money. You do not need one. Do the "Big 3" and that will be more than enough.
